I've posted a few notes concerning my problem with the Orion2 and my logging program, DX4WIN, but I suspect it is also evident with any logging program. The problem is, that the O2 will not select th
Is there anyone using a logging program that has packet spots that you can click on and change the frequency and mode/width of the Orion2? I find that if I set up my band stacking registers to my lik
Works fine here with DX4WIN and a SteppIR controller. George _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/ten
I should have said works fine with 2.037J with the Orion2, DX4WIN, and a SteppIR controller. I forgot to mention the version of FM I was using. George _______________________________________________
I found that by setting the mic in the SSB menu to MIC when running SSB and never BOTH that this helped solve the problem. I set it to EXTERNAL when running PSK31. George Quoting Mark DeBord <markink
If the Orion2 never sends info unless requested how does that explain the operation with my SteppIR controller if the SteppIR controller never requests a change of frequency? As I was told the SteppI
I have the same "PACK" problem with DX4WIN. Duane, there was no file attached in the EMAIL? I saw the paper clip to the left of the EMAIL but no attachment? Thanks. George ___________________________
Great story! Enjoyed reading your plight with UPS, hi. George _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/te
I have an Orion-2 latest FW version. Is there any way I can rectify the side tone level from the speaker to head phones. When I am on head phones it is comfortable at 77 and when on speaker it is com
Concerning Rob Sherwood's comments on the two radios side by side and their head to head performance. Are we comparing a $4500 Orion II to a $4500 Icom 7800? George __________________________________
I use MMTTY with a home made interface with the O2 and never experienced this??? George W2YJ _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.con
The hardware noise blanker is too aggressive in my Orion2. I have power line noise on 160 meters and a variable HW noise blanker would be useful if it could be cut back some. Currently, when I invoke
What's wrong with Ten Tec addressing this drift problem in the Orion's??? George W2YJ _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting
I have been fighting the "antenna" per band changing for over a year. The only way the antenna selection takes place, per the TX menu, is by pressing the band buttons. I have mentioned this to Ten Te
I have been complaining of the completely absurd settings when clicking on a packet spot. It's a crap shoot what mode/band width will come up??? I've been trying to figure out where the O2 gets this
Hey, is what you are telling me about the VII what I want in my O2? George W2YJ _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/m
Again, is EQSL good for any ARRL or CQ awards? As for paying for awards, would you expect anything else? Life is free, everything else costs! I use LOTW and QSL cards received through the mail. Gave
Carl; Thank you for making this clear about the ARRL having to charge for the service. I have no problem with paying them for the service and awards. George __________________________________________
This sounds like my O2's bandwidth crap shoot when I click on a packet spot? I never know what bandwidth will show up on the O2 and it doesn't make a difference whether it is CW or SSB! George ______
Where are the firmware revision notes for 2.038K? Thanks. George _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo