Yes please. I have used homebuilt e-keyers since 1957, and still find it fascinating. 73. Gunner Juul-Nyholm Maglegårds Allé 93 B OZ6NF - 5P5S 2860 Søborg Danmark Mobil: +45 4013 0044 www.GodePenge.d
Much better: Find a ½ x 6 inch tape with a string of white LEDs for 12 V, and glue it in place below the cursor window. More available and will last your time. 73 OZ6NF . Gunner
Hello again, Byron, I have run through the received 315 schematics in order to evaluate the robustness of the circuits in detail against variation on receiver performance due to chance in component v
First: Many thanks for all your advices concerning shift of battery. Piece of cake, and my O2 is as stable as ever. Second: The O2 went dead. Turned out to be the MOLEX power connector has burned out
Thanks for many advices on how to change the MOLEX connector on my O2. I chosed to follow the advice from Wes/N5WA. The holes for the connector in the PCB could accomodate my stranded AVG16 PTFE insu
My O2 says battery failure, and will only start after several master resets. so Ill have to change the battery for the memory. I need a reference for how to open the front panel and change the batter
Hi Gary, I would like the 6-encoder board. Paypal? Gunner Juul-Nyholm Maglegårds Allé 93 B OZ6NF - 5P5S 2860 Søborg Danmark Mobil: +45 4013 0044 www.GodePenge.dk www.PositiveMoney.org
Hi Andy, I need the main tuning encoder for my ORION II. The present one has begun not to give impulses correctly. Very annoying! PayPal` 73 Gunner Juul-Nyholm Maglegårds Allé 93 B OZ6NF - 5P5S 2860
Hi Rick, Just for your info: Only your mails land in my mailbox for Junk. (macOS 10.13.8, Mail app via iCloud) Gunner Juul-Nyholm Maglegårds Allé 93 B OZ6NF - 5P5S 2860 Søborg Danmark Mobil: +45 4013
Hello Duke, I would like an encoder board and a VFO encoder. My ORION II was the last used one that Ten-Tec sold, and some of the small encoders are very worn. The VFO encoder begins to malfunction,
I got an encoder from TT (some years ago!). It was a piece of cake to loosen the frontplate and shift the encoder. Once you begin it is easy. 73 Gunner /oz6nf
I have had my ORION II for 3 years and use it a couple of hours daily, mostly but not exclusively on CW. I love it, but I fear that it may break down, and not all parts are available anymore. So in o
Agree, the minimum OSK delay is 100 ms which amounts to app. three dots or a dash at 40wpm. OK with me!! Very few hams will complain about it? Gunner Juul-Nyholm Maglegårds Allé 93 B OZ6NF 2860 Søbor
The antenna tuner battery is actually a C2025, but a CR2032 has the same dimensions and fit in. 73 Gunner/OZ6NF. Gunner Juul-Nyholm Maglegårds Allé 93 B OZ6NF 2860 Søborg Danmark Mobil: +45 4013 0044
Rick, Agree, the SKY-SDR is really surprising. I use mine more than 90% of the time, 8w out. My ORION II is getting dusty.. Suggestion: Make the VFO knob to facilitate cw speed adjustment by pressing
The red plastic pointer in the 238 can easily be replaced by a piece of small piece of normal installation wire. I choosed one with a red insulation. Fold the wire to combine the string and the elast