Radio plays fine on other bands, but on these bands acts as if the button has been clicked to disable transmitter, and shows SWR of -8.88 on all of those bands. I had a couple relays go bad in the fi
I use the Ten Tec 9420 power supply with my Hercules II. It has the following problem - With the Herc turned off, there are times when RF in the shack on certain band and antenna combinations causes
I have a broken Hercules II amplifier for sale. The problem is that the back of the amp has a burnt smell and the output is only 300 watts. I suspect, as does Ten Tec, that I have one or more blown f
SOLD PENDING FUNDS Thanks, all. I suspect, as does Ten Tec, that I have one or more blown finals. They replace all eight if one or more are blown, so the cost of repair is very high. But, if someone
I'm looking to buy a cheap or broken Pegasus. I only need the computer connectivity to be working. Blown finals, no output, bad receiver are no problem. As long as the computer connection is good, I'
John - The install EXE program should be in the ZIP file you downloaded along with the RUF file that you load. Unzip the files. Install the Ten Tec Install program. Turn on Orion while holding the Us
Charles - The schematics are available. I think you can find them in the Pegasus Yahoo Group files. If not, ask around. I know I've seen them and had a copy at one time. But that was several computer
Jeff - I took the existing cable and cut it off 3" from the connector. I then put Anderson Power poles on the end so I have a 3" pigtale with the Ten Tec connector on one end and power poles on the o
I've been stewing about getting an update for my Orion I. Not getting the update had made the update seem like something I really needed. It was like I was missing out. After reviewing the Ten Tec up
For Sale - Omni VI with the Factory Installed Option 3 making it electrically an Omni VI Plus. Appearance 9+ out of 10. Electrically - no issues, everything works. Includes 1.8mhz, 500hz, and 250hz f
The radio has been sold. 73 de K1ESE John Omni VI with the Factory Installed Option 3 making it electrically an Omni VI Plus. Appearance 9+ out of 10. Electrically - no issues, everything works. Incl
DXLab Suite http://www.dxlabsuite.com/ 73 de K1ESE John Can someone share with me what general logging programs they are using with their Orion and the N4PY control programs. I am particularly inters
Scott - Many thanks for the update. We really appreciate knowing how things are going. 73 de K1ESE John Not much more further at the moment. The last word I got from engineering (Thursday 10/9) was t
Scott - Thanks for the update!! 73 de K1ESE John Unfortunately, not this week. Back on the 13th I changed the status to read "fall" rather than September/October as I didn't believe we were going to
Joe - Any of those three would be great, but a used Orion 1 from Ten Tec is the best bang for the buck. By getting it from Ten Tec used you get a 10 day free trial in case you hate it, and a 30 day f