I have an Inrad W1 which I bought from the Vibroplex folks at a hamfest. It covers my big ears. It is considerably more comfortable than the Ten-Tec model 777 DX PRO. 73 Carl, K4SEV On Tuesday, Febru
Hi Bob. Are you still looking for a project Argosy? If so, I have a 525d that you might want. I have seven Argosy's and I will never get to them so they need new homes. Just let me know. 73. Carl, K4
Subject: [TenTec] 160 meter TenTec 240 info wanted To: tentec@contesting.com Date: Thursday, January 10, 2019, 3:50 PM I'd like to find a PDF for the schematic for this transverter. It is not shown
Many years ago I had a similar problem with an Omni V. I took it to Ten-Tec and they fixed it while I waited. According to the invoice the "monitor board" was not grounded. I am not familiar with a m
I tried one of those huge capacitors with a field day setup. It was placed across the output of the voltage booster. The interesting thing is that I had to charge it up before use. Otherwise it was j
Hi gang. I think I am the former owner of that 515. I promise that I never modified it in any way, although I suppose someone before me could have worked on it. It sat on a shelf in my shack for seve
Hi Kris. The last time I replaced the backlight in a Delta II the rig wound up with an extra dot in the display. Ten Tec said it was caused by stray capacitance. I am just curious if you had the same
Here is what Ten Tec told me years ago: "If there is a diode just to the left of the MC74HC573 chip (third connection on the left edge of the card) place a jumper across it. Depending on the model of
You might check the power connector on the rear of the Herc II. I have had bizarre things happen when fewer than all of those pins are making contact. Carl, K4SEV Enviado desde mi iPhone
Hj Jan. If you still have the 268 cable I will be pleased to purchase it. I can do PayPal. Just let me know. Thanks and 73 Carl, K4SEV The Ten-Tec Model 268 cable plugs between the Accessory DIN conn
I talked to Ten Tec yesterday. They said my new Eagle should be ready to pick up by the end of this week. I placed the order on July 7.They are moving up the hill behind the present location. It is a
Well it looks like there really is a new flock of Eagles. They just called me from Ten Tec to come and pick mine up. Carl K4SEV Curious if anyone has heard anything about production schedules for ord
In all the excitement surrounding the merger and the big sale, I sort of lost track of the Patriot. I think it was supposed to be available in August. Has anyone heard anything? Thanks. Carl Winkles
Ten-Tec calls those things "ears". The last time I needed one they had them. You have nothing to lose by giving them a call. Carl, K4SEV Sent from my magic decoder ring
All three are great CW rigs. I find that with the Omni VII I can tune it right on the other station's' frequency just by ear and not doing anything special. You won't go wrong with any of the three.
A previous owner of my TX100 apparently asked the factory how many were produced. I have a postcard from Ten-Tec with a hand written note to him saying that approximately 165 were made. I hope this