i have never needed any repair for my Orions, jack ak7o Listed below is the repair history for my Orion. I have been very happy with Ten-Tec's service, but I am curious if my service history for my O
i have not used any sort of interface with my Orion ever. i found that MixW and the cables supplied by Ten Tec with the Orion work fine for all digital modes. i did interface the CW keying of the Ori
you are on your own there scott. TT used to make stickers for the buttons. guess you will have to make your own. the great thing about that is that you can do it again! HI. jack ak7o Please pardon a
i use LOGic8 and love it. it will do some rig control. i use it in conjunction with MixW which feeds info into LOGic8. jack ak7o Hi, Can someone share with me what general logging programs they are u
great description Ron. LOGic8 also has the ability to turn your antenna to the station logged. has a CW keyer. does have a steep learning curve but Dennis (writer) is very kind to respond to any ques
1000 Hz is fine for CW only operation. i have my Orions set with that filter in line all the time. that cuts some of the noise one hears as well. when necessary i can choose 500 or 250 Hz. jack ak7o
i had so many problems with Vista that i wiped it off my new computer's hard drive and installed my old copy of XP. that ended all my radio/computer problems and several others. jack ak7o Is there an
the Orion (original) is the best receiver i have ever had/used. jack ak7o i've used some great receivers over the years - my favorites are the drake r7, aor 7030, icom r75. among a few transceivers.
years ago i used WordPerfect to create my logs. then i discovered LOGic and have never gone back. presently i use LOGic8. it will do everything i can imagine and more. clearly there are cheaper loggi
Ron, i had the same questions in regard to the Orion. i am not familiar with the Omni VI. however one can key any radio directly in Windows with MixW thru a serial port (or USB/serial adapter) with t
John, you can use either lcw or ucw. it depends to me on which way you like to tune in a signal--from the lower to upper tone or vice versa. i like to tune UP so i use lcw on all bands and tune from
my Orions copy Mode! jack I don't think A>B copies mode on the Orion. 73, Barry N1EU Recently I have noticed that when I try to copy VFO A frequency and Mode to VFO B it will not copy. The frequency
i have had no problems with LOGic8 and the original Orion. Jack AK7O Thought I check here on a long shot that maybe someone else may have experienced the same problem. When I use the rig interface op
I tried running Vista as my operating system and found that nothing much would work right so far as ham radio was concerned. i wiped Vista off my computer and reinstalled XP. no problems with Orion a
does Xlog not send the CW to a serial or parallel port? i use MixW and it sends the keying to your choice of several serial ports or the parallel port (printer port). Jack Can anyone on the list help
John, i had to built a simple switch to key my Orions. there is a circuit diagram in MixW showing a diode, transistor, and two resistors that is keyed by a serial port or parallel port from the compu
i found this on the web: http://lists.contesting.com/_tentec/2006-08/msg00508.html good luck Jack AK7O -- Original Message -- From: "John Simon" <jrsimon@ozemail.com.au> To: <alan.n5na@gmail.com>; "D
you give a fine way to make a two tone generator on the cheap Marinus. if i ever get a mike i will keep that in mind. no mikes for radio in this shack--only CW and PSK31 once in a blue moon. oh...i d
my choice for good solid radio is the Orion (original unmodified). works great and one has several choices of firmware to try.the main receiver reminds me of the Collins 75s3b i had years ago: quiet
if he does not have one for sale, i have an original Orion for sale. email me at ak7o@arrl.net if interested. jack ak7o Hi Ken Your email to the group got kind of messed up on my end, but I think you