It s easy...well, you have not heard me send CW, so I can say easy. I send with my left hand on the straight key and my right with the paddles. They are set normally so it is not hard. I guess this i
The screen is also interesting. Are we going to be able to / have to replace the screen to get the reversal and any other effects? John Graves WA1JG albrooks7@comcast.net wrote: I'm going to agree wi
Mike, The 169.x.x.x IP address is one that is automatically assigned by Windows to the ethernet interface when it is either not connected at all or it can't find any address from the network it is co
Mike, I'm the IT guy. No idea on the passcode You can confirm that you are connected by: Open a Dos Box by Click on Start>Run If the run box says cmd click OK. If not enter cmd in the box and click O
Mike, http://www.whatismyip.org will show you your public ip. John Graves WA1JG jh.graves@verizon.net JOY!!!! I had to "add the IP" into another box to get the thing to stick. but now, I have control
Mike, I have my IT hat on again, so these are MY suggestions. As I understand the situation, you want to run the OMNI VII from several computers at your house. SO I would be tempted to try wireless i
Mike, Yes, you can use the wired interface but you will have to configure a different address on the same network (192.168.1.x) I would recommend for now that when you use the wireless you disable th
Winston, I am using the cable with good results. The connections are line in and line out, and match the line connections on my sound card in my laptop. Remember that you have to connect line in to l
I spent a few hours operating in the CQWPXRTTY with my Jupiter this past weekend. I was using N1MM and MMVARI and that seemed to be a good combination. I am curious how others are setting up the Jupi
Rick, I have been operating my Jupiter directly from my soundcard into the line input and output. I am now running as suggested. That is I have set the power output to 100 watts. Then I reduce the so
As an owner of a Jupiter, Omni-C. Argosy, and RX-10/TX100, I can't begin to complain about support for all of these rigs, some of which date waaay back. Any time I have had a question, I have receive
I am putting my RX-10 back together, and cannot make the dial cord track. Can someone either draw a diagram or take a picture showing how to string the dial cord? TIA John / WA1JG
I would like to replace the missing trim ring on my Omni-C. If anyone either has a spare case or trim they can part with, I will give it a good home. TIA, John G. / WA1JG
Thank God for *micro*electronics! ;-) John / WA1JG Joe, W2RBA (a German educator, hint hint) _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.con
What is the proper breaker for the Argosy? I have never had a problem but I use it most of the time on low power. John / WA1JG OTAKEBI@aol.com wrote: Airpax breaker for Paragon and OMNI V and VI is P
My Omni-C is embarrassed to appear in public without it's Trim Ring. If anyone has a spare or has a totally inoperative Omni-C, please quote me on the the chrome. I think the the Trim is identical fo
Can you use a Jupiter to listen to DRM? John / WA1JG Paul, KD3JF Is anyone on these email reflectors a SW listener/DRM listener? I listened to DRM with my Orion (before I sold it) and still have the
I have a RX-10 that I am going through. A PO had installed nicads as a power source and they are over the hill. I was checking operation last night and heard signals on 20 & 40. The Tune control work
I'd make a bid if you can supply proof of a completed smoke operation. Everyone knows that electronics will work again if you replace the smoke you let out. John / WA1JG ron wrote: On Mon, 2007-06-18
Kirk, Buy the Argo...and if it is not enough....try this: http://www.thp.co.jp/thp%20hp%20Eng/amateur_eng/hf_eng.htm#100bdx By the way..I own a Jupiter and love it. I use it on SSB and drive it with