Version 1.033 Improved FSK Transmit Power Level for 100 watts Corrected headphone AF level with headphones connected at power up The first item starts FSK out closer to the selected power output, and
Hi Glenn, You are absolutely correct. We totally dropped the ball on the high speed sweep board. We kept wanting to get back to it, even while developing the Eagle, several other projects, a couple o
Current plan is, the new RX366 will be available as: 1 - You purchase a kit, install yourself. Fairly simple. Remove top/bottom, remove tmps to current A6 sub receiver, remove screws, screw down RX36
I was only using the Orion 3 as an example. Someone had mentioned that the new RX366 installed would cost as much as an Orion 3. It won't, not anywhere near. The RX366 is intended for the Orion and O
Posted the latest Pegasus GUI to the TenTec web site. http://www.tentec.com/index.php?id=201#down GUI 2.04 - Windows 98x/ME/2000/XP/7 32 and 64 bit Corrected issue with some computers not able to per
Changes include: V1.815 Modified RF POT and PBT POT to reduce false triggers/changes Corrected TUNER ON/OFF recall of incorrect caps/inds setting The first one reduces the amount of clock/data traffi
To All, The Windows 7 compatible Pegasus GUI Version 2.03 is now posted on the download page for the Pegasus. Release Notes: -Version 2.03 06/24/11 Rebuilt to handle Windows 7 comm ports Rebuilt usin
Hah, I can see it now.... TenTec's new Rig.... "Oh Brother...." The rig that forces you to call others with... "Where art thou??" instead of CQ CQ CQ . hi hi Sorry, back to work, cranking out new rig
Eagle Changes include: V1.810 Modified AGC for improved IMD performance Resolved Memory Recall Transmit issue Improved RF Gain Range The "Modified AGC for improved IMD performance" was to answer some
Hi John, My desire is to provide an update a year for each of the main rigs we still sell. Namely Orion(s), OMNI-VII, Eagle, and Jupiter. To help some Jupiter users who are running Windows 7 64 bit,
Thought I would voice in a few comments on TenTec rigs, transmit power, testing of such, and of course, TenTec service. TenTec tests the transmit output power on every rig at different test stations.
Changes include: V1.790 Improved CW T/R Transitioning Helps reduce possible key clicks in certain conditions Corrected Improper Transmit Gain when switching bands using A/B V1.795 Improved FM Receive
I cut/pasted the following from the eham post on the event. -- This Special Event is to honor the two brave radio operators Jack Phillips and Harold Bride for the 99th Anniversary of the Titanic trag
One good thing about some of the CAT programs, such as N4PY and dxlab commander, is that you can run the programs, and then just use the radio's front panel for controls. This setup gives you a lot o
Just a quick update, we generated two USB Installation programs for the Eagle. One is for Windows XP through 7 32 bit systems, the other is for Windows XP through 7 64 bit systems. They are self-inst
The Orion 565 firmware is in test phase. When it is deemed sufficiently stable and mature, it will be released to the general public. So far, this specific version looks promising, but I want to give
Version 2.064x11 was just released to the TenTec website. http://www.tentec.com/index.php?id=204#down Modifications include: Reduced "Receiver blow-by" in sub and main rx Incorporated NR from the Ori
I just posted the schematics for the Eagle on the TenTec website: http://www.tentec.com/?id=360 Click on Downloads. They appear in the documents column as a single pdf. Also posted a couple of other
When updating to V2.064x11, it is recommended that after you upgrade the firmware, that you turn the rig off, and perform a RAM Clear reset followed by a master reset and clear user memories and filt
Hi John, Normally, the answer is no, you don't need that second master reset. However, since sometimes people go from much earlier versions of firmware, e.g. pre 1.375, with a much different memory m