Changes include: V1.786 Added POST-AGC filters to improve selectivity. (Improved receive audio) Adjusted the center frequency of the 15kHz filter to improve performance. Found at: http://www.tentec.c
Just a quick update, we generated two USB Installation programs for the Eagle. One is for Windows XP through 7 32 bit systems, the other is for Windows XP through 7 64 bit systems. They are self-inst
Thought I would voice in a few comments on TenTec rigs, transmit power, testing of such, and of course, TenTec service. TenTec tests the transmit output power on every rig at different test stations.
Changes include: V1.790 Improved CW T/R Transitioning Helps reduce possible key clicks in certain conditions Corrected Improper Transmit Gain when switching bands using A/B V1.795 Improved FM Receive
I cut/pasted the following from the eham post on the event. -- This Special Event is to honor the two brave radio operators Jack Phillips and Harold Bride for the 99th Anniversary of the Titanic trag
One good thing about some of the CAT programs, such as N4PY and dxlab commander, is that you can run the programs, and then just use the radio's front panel for controls. This setup gives you a lot o
Hah, I can see it now.... TenTec's new Rig.... "Oh Brother...." The rig that forces you to call others with... "Where art thou??" instead of CQ CQ CQ . hi hi Sorry, back to work, cranking out new rig
Eagle Changes include: V1.810 Modified AGC for improved IMD performance Resolved Memory Recall Transmit issue Improved RF Gain Range The "Modified AGC for improved IMD performance" was to answer some
Hi John, My desire is to provide an update a year for each of the main rigs we still sell. Namely Orion(s), OMNI-VII, Eagle, and Jupiter. To help some Jupiter users who are running Windows 7 64 bit,
To All, The Windows 7 compatible Pegasus GUI Version 2.03 is now posted on the download page for the Pegasus. Release Notes: -Version 2.03 06/24/11 Rebuilt to handle Windows 7 comm ports Rebuilt usin
Posted the latest Pegasus GUI to the TenTec web site. http://www.tentec.com/index.php?id=201#down GUI 2.04 - Windows 98x/ME/2000/XP/7 32 and 64 bit Corrected issue with some computers not able to per
Changes include: V1.815 Modified RF POT and PBT POT to reduce false triggers/changes Corrected TUNER ON/OFF recall of incorrect caps/inds setting The first one reduces the amount of clock/data traffi
Hi Glenn, You are absolutely correct. We totally dropped the ball on the high speed sweep board. We kept wanting to get back to it, even while developing the Eagle, several other projects, a couple o
Current plan is, the new RX366 will be available as: 1 - You purchase a kit, install yourself. Fairly simple. Remove top/bottom, remove tmps to current A6 sub receiver, remove screws, screw down RX36
I was only using the Orion 3 as an example. Someone had mentioned that the new RX366 installed would cost as much as an Orion 3. It won't, not anywhere near. The RX366 is intended for the Orion and O
Version 1.033 Improved FSK Transmit Power Level for 100 watts Corrected headphone AF level with headphones connected at power up The first item starts FSK out closer to the selected power output, and
Changes include: Version 1.035 Improved Auto Tuner Power Settling for reliability Increased DSP output level in Sideband for hardware reliability The first item helps the automatic internal tuner set
There is actually nothing wrong with the standard prolific PL2303 chipset, nor the drivers (caveat, not that I know of since the last time I tested anyway). However, the problem comes in to play when
Well, the Eagle isn't everything to everyone. I did try to get them to put a propane powered ceramic heater, but, no such luck. No one thought anyone would need it, now we know. Of course, you could
Ray (and others) asked for an RX366 update. We are doing another 599 run, it is selling very well. Which is good news for the RX366. Since the RX366 is mostly based on Eagle boards, when we set up fo