I e-mailed service at Ten-Tec and they sent me a chip and instructions by mail to fix the problem. It involved taking the bottom off the Jupiter, putting in the chip they sent, doing a reset by turni
I'm not sure what "profile" is. I didn't see anything in my program to switch profiles. How is it done? Do you have to have the bigger memory chip to have these profiles?
Do you have to have the optional larger memory chip to get these personality choices? When I had the new firmware loaded, all I got down in the lower left corner when I held the Mode button was CW. M
Does anyone know if and when Ten-Tec is planning an upgrade of the Jupiter firmware? Will the firmware upgrade give our old Jupiters the same features as the new ones, such as code copy on the screen
I know this has probably been addressed here before.... However, I want to use my Jupiter for PSK-31. Can I hook it straight into the sound card, using the supplied accessory cord, or is it better to
I bought a Jupiter in 2001 and have since been using a serial cable to connect the serial port on the Jupiter to the serial port on my computer. I recently bought a new computer which has no serial p
Thanks to everyone for the information on serial to USB converting. I'm not at home with my radio and computer right now, but as best I remember, I would need a cable with a 9-pin male serial plug to
While it's not a Ten-Tec brand, I use an LDG automatic tuner with my Jupiter. It helps match up any slight mismatches on my Butternut vertical, especially on the wider bands. I think LDG once made th
My understanding to the whole Omni name scheme is that Ten-Tec first introduced the Omni A (analog dial) and Omni D (digital dial). Later, they decided to improve both models by changing some of the
John, You are correct. Sounds like you did a lot of research. By the time the Omni Series C came along, there were no analogs so there was no need of Ten-Tec to call it the Omni D, Series C. The whol
Does anybody have an explanation why Ten-Tec had a Triton I, Triton II and then a Triton IV, but no Triton III? Was it a prototype model that never made it to market? 73, Winston K4CWQ
I have an old Signalizer. It is a speaker unit and filter and has a built-in power supply to power it. However, it was not a power supply for other units. 73, Winston K4CWQ
I've used several mics with my 509, including the Ten-Tec banana style mic that was sold with it. I get the best results with a Shure 444 high impedence. It gives more punch than the Ten-Tec mic. A D
I once had a Triton IV that had an intermittent low transmit output as you describe. I cured the problem by pushing down on the IF filter board. These filter assemblies are mounted on small circuit b