- 1. [TenTec] Argosy with Linear (score: 1)
- Author: "John W. Farler" <k4avx1@windstream.net>
- Date: Fri, 06 Mar 2020 11:06:16 -0500
- As I recall, Ten Tec made a relay accessory that fit inside the radio to key an amp or other device. The one I had years ago already had it built in to my surprise. I don't know whether you can't fin
- /archives//html/TenTec/2020-03/msg00001.html (8,104 bytes)
- 2. [TenTec] Argosy with Linear (score: 1)
- Author: "John W. Farler" <k4avx1@windstream.net>
- Date: Sat, 07 Mar 2020 11:14:27 -0500
- Mike has the solution for the amp relay. Have you checked to see if there's already one there? As for the audio filter, if it uses the same one as the TRITON IV, it's a simple op amp device, that plu
- /archives//html/TenTec/2020-03/msg00009.html (8,424 bytes)
- 3. [TenTec] Bill, I have the pointer you need and will send it to you if your QRZ address is ok. I got fed up with the crazy dial setup and put an old turns counter I had from many years ago on it. Does (score: 1)
- Author: "John W. Farler" <k4avx1@windstream.net>
- Date: Sun, 22 Mar 2020 11:42:56 -0400
- I am refurbing a 238 tuner, and the red pulley/pointer is missing. Does anyone have a source (3D print) for a new one? (this is not a simple red pointer like on the Omni/Triton that hangs on the co
- /archives//html/TenTec/2020-03/msg00022.html (9,671 bytes)
- 4. [TenTec] Long shot! TT 239 panel needed (score: 1)
- Author: "John W. Farler" <k4avx1@windstream.net>
- Date: Sun, 23 Feb 2020 23:59:11 -0500
- I'm going to put a REAL turns counter on my TT 238 tuner. I love the tuner, but despise the way it is set up with the string run dial! I know the last version the made had a real turns counter, and c
- /archives//html/TenTec/2020-02/msg00068.html (7,328 bytes)
- 5. [TenTec] Need knob! (score: 1)
- Author: John <k4avx1@windstream.net>
- Date: Tue, 24 Dec 2019 13:50:22 -0500
- Trying to keep my excellent TT 238 tuner going and looking like it was originally. As the guy used to say, home of Ten Tec and other fine plastics. Anyway the knob on the antenna switch at the bottom
- /archives//html/TenTec/2019-12/msg00036.html (7,373 bytes)
- 6. [TenTec] 238 parts (score: 1)
- Author: "John W. Farler" <k4avx1@windstream.net>
- Date: Sat, 28 Dec 2019 14:13:49 -0500
- Thanks for the replies about the bar knob and end panels moldings for my TT 238 Tuner. I already have the manual, but will check with TEN TEC to see if they have the end moldings for the unit. I have
- /archives//html/TenTec/2019-12/msg00040.html (6,639 bytes)
- 7. [TenTec] Omni VI+ meter (score: 1)
- Author: "John W. Farler" <k4avx1@windstream.net>
- Date: Wed, 27 Nov 2019 18:53:46 -0500
- I'm looking for a replacement meter or cure for a sticky meter on my Omni VI+. Haven't looked in the manual yet for the specs, but think it's the same as the one in the Omni V. Haven't tried the "dis
- /archives//html/TenTec/2019-11/msg00048.html (6,942 bytes)
- 8. Re: [TenTec] 9420 VS Switcher (score: 1)
- Author: "John W. Farler" <k4avx1@windstream.net>
- Date: Tue, 04 Jun 2019 13:23:55 -0400
- Gary, My Hercules II blew one section of the 9420 or the supply in losing one section blew the control section of the amp. TT repaired the amp, but I didn't want to try to get the supply down there f
- /archives//html/TenTec/2019-06/msg00022.html (8,045 bytes)
- 9. [TenTec] Hercules II fan noise (score: 1)
- Author: John Farler <k4avx1@windstream.net>
- Date: Tue, 20 Nov 2018 20:30:42 -0500
- My Hercules II fan seems kinda loud. I have no way of knowing whether there's a problem, but the ads, of course say it's a quiet fan. This might be something I can fix, if it is going out. Can anyo
- /archives//html/TenTec/2018-11/msg00074.html (7,462 bytes)
- 10. [TenTec] Eagle PS? (score: 1)
- Author: "John W. Farler" <k4avx1@windstream.net>
- Date: Mon, 03 Sep 2018 12:51:22 -0400
- I'm using my Eagle with an Astron 35 amp analog supply. One already blew the diodes in the supply, but this one so far is OK. It gets pretty warm, and I don't particularly like Astron supplies. I'm t
- /archives//html/TenTec/2018-09/msg00010.html (7,037 bytes)
- 11. [TenTec] Re Power Supply? (score: 1)
- Author: "John W. Farler" <k4avx1@windstream.net>
- Date: Mon, 03 Sep 2018 13:04:38 -0400
- Forgot to sign that query! Thanks, John, K4AVX
- /archives//html/TenTec/2018-09/msg00011.html (6,438 bytes)
- 12. Re: [TenTec] Centurion & Tubes (score: 1)
- Author: John Farler <k4avx1@windstream.net>
- Date: Sun, 12 Aug 2018 11:51:14 -0400
- I use a Hercules II, with an MFJ 75 Amp switcher, and it works quite well with my Eagle. I do have an amp switching box between the two, although it probably wouldn't be necessary. I also use it with
- /archives//html/TenTec/2018-08/msg00101.html (8,115 bytes)
- 13. [TenTec] Omni VII and ALS-500M (score: 1)
- Author: John <k4avx1@windstream.net>
- Date: Wed, 16 Mar 2016 13:58:59 -0400
- I have a friend with the above combination and he needs to know how to key the amp from the rig. CW qsk not needed. I'm laid up with a blood clot and can't visit him and don't have the manua
- /archives//html/TenTec/2016-03/msg00175.html (6,938 bytes)
- 14. [TenTec] Question....way out there..... (score: 1)
- Author: John Farler <k4avx1@windstream.net>
- Date: Thu, 11 Feb 2016 16:39:44 -0500
- I've become an owner of the TT Argo VI, as a gift from the local radio club for somethings I did during my ham lifetime. The situation is: I want to use it at times with the old, old 50 watt amplifie
- /archives//html/TenTec/2016-02/msg00086.html (8,631 bytes)
- 15. [TenTec] Wondering.......mind wandering. (score: 1)
- Author: John Farler <k4avx1@windstream.net>
- Date: Thu, 7 Jan 2016 14:44:24 -0500
- Well, lots of great discussion lately.....it has jarred my mind. Makes me wonder how many angels would fit on the Ten-Tec emblem? (Including the orange dot, if yours has one) I wonder whether Ten-Tec
- /archives//html/TenTec/2016-01/msg00142.html (8,394 bytes)
- 16. Re: [TenTec] pimp my eagle. (score: 1)
- Author: John Farler <k4avx1@windstream.net>
- Date: Thu, 7 Jan 2016 14:52:31 -0500
- Rick, As you can see, I set out some ideas for just a mobile rig. Perhaps as a combination of ideas, there could be two face plates, or perhaps a simpler one that was just a remote control with a few
- /archives//html/TenTec/2016-01/msg00143.html (12,485 bytes)
- 17. [TenTec] I'm old but I'm slow.... (score: 1)
- Author: John Farler <k4avx1@windstream.net>
- Date: Thu, 14 Jan 2016 12:48:11 -0500
- Several months ago, on the Ten Tec list, I told about a ham who has almost lost his sight, and asked for parts to fix an old 540 for him to use, since it has only a few knobs, and should be easy to u
- /archives//html/TenTec/2016-01/msg00309.html (8,741 bytes)
- 18. [TenTec] New Owner? (score: 1)
- Author: John <k4avx1@windstream.net>
- Date: Sat, 05 Dec 2015 10:11:41 -0500
- I'm guessing.....Gary? He's done well with VibroPlex, adding new product lines and other companies. Also, he's already in the area, knows the business, and not afraid to take the big step. Whoe
- /archives//html/TenTec/2015-12/msg00071.html (7,526 bytes)
- 19. [TenTec] Ten tec 540 parts (score: 1)
- Author: John <k4avx1@windstream.net>
- Date: Tue, 15 Dec 2015 18:20:44 -0500
- Back in late summer I sought help on an old Triton 4 that needed drivers, finals, and some work. It was to got to a handicapped ham. Mike Bryce immediately offered to repair it and did so with
- /archives//html/TenTec/2015-12/msg00321.html (6,925 bytes)
- 20. [TenTec] QST Ads? (score: 1)
- Author: John <k4avx1@windstream.net>
- Date: Sun, 18 Oct 2015 21:13:59 -0400
- Just wondering - as far as I can tell, there were no Tented or parent company ads in the latest QST. Is this correct ? Makes me wonder. Sent from my Samsung Galaxy Tab®4
- /archives//html/TenTec/2015-10/msg00097.html (6,541 bytes)
This search system is powered by
Namazu