It has been a couple of years since I've used my Omni VI Plus and I've forgotten how to set the rig in standby and still key the side tone oscillator. I used to be able to do this without even thinki
I received a couple of direct e-mail responses and the solution is to hit the ST button and then the CW button. One guy told me that I posted this to the TT reflector back in 2010. :-) 73..de John/K4
73 Clayton..de John/K4WJ Subject: Re: [TenTec] Keying the Omni VI Plus in Standby Mode To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com> Date: Saturday, May 21, 2016, 12:59 PM I received
Bob, Isn't SWR determined by the match between the feedline and the load and not by resonance? I believe source amperage goes up when the impedance of the load is lower than the source. Please correc
I have an Omni VI Plus. I put my rig in the split mode and locked VFO A. I then hit the A/B button and the frequency displayed went to VFO B and it 'LOCK' lamp was out. I locked VFO B out. I then swi
Is a static IP address required when using the Omni VII from a remote location? I've read the OnePlug manual and I don't see any mention of a static IP address. The IP address for the location of the
Geoffrey, Thanks for all of the information. I checked my router and it does have reference to DynDNS.org so I will have to do some more research. I need to know more about the security aspect of usi
Very funny Hyder! Now get up early and join us guys some morning. 73 amigo..de John/K4WJ 599+++ Test..de John/K4WJ _______________________________________________ TenTec mailing list TenTec@contestin