I have decided to not try SO2R after all. So... I am selling the following Tentec gear. All very functional! Tentec OmniVI/option 3 upgrade. Electrically a 10, cosmetically a 9.2 ( metal scrape -1/8"
Folks of the reflector, I have found that my OmniVI is still having a freq wandering/shift on 30m (only, I believe). I am reluctant to attempt any work of that sort on it myself...my last such attemp
I have recently received on-the-air reports of a slight frequency shift, 30m only, with my option 3 OmniVI. No reports on other bands. As I only recently have had an antenna worthy of being called su
I have F/S a pair of INRAD 2.8 kHz filters for TT radios. 2800 Hz BW at 6.3 MHz 2800 Hz BW at 9.0 MHz. $160 shipped CONUS for the pair. Sold as a pair only. Allan K7GT SW Oregon (where it is finally
A week or so ago I posted a problem with reported frequency instability on my OmniVI when operating on 30m. Since then I have tried an experiment wherein I left the power supply on rather than turnin
I have recently acquired another brand of radio gear for which a 1000 Hz filter is available from INRAD. A serious contester friend of mine has suggested I use one in the subrx in CW mode and I am pl
I have received four firm inquiries about my proposed special order for INRAD filters with appx 1000 Hz bandwidth. All four were interested in filters for the 9.0 MHz IF. With my two rigs (although o
I have five others interested in the 1000 Hz/9.0 MHz filters. Assuming one each and two for me, that makes 7. I need 10 to make the special order. Do any others wish to join this venture? Do any of t
I had been trying to get a group together to order 1000 Hz filters for the 9.0 MHz IF in the OmniVI, etc. rigs. As it turns out, there is now a reflector for INRAD filters and a post to it brought fo
I have a 755 INRAD filter F/S. It is for the bandpass IF and would pair nicely with a 754 in the main IF. INRAD price is $115, I will ship for $95. K7GT
Due to a major reconfiguration of my station (giving up on SO2R), I have the following TT gear F/S: Corsair II $395 OmniVI/opt3 $1195 Hercules II $950 9420 p.s. $450 961 p.s. $140 962 p.s. $140 705 m
Much of the gear advertised is sold. Remaining is: OmniVI/option 3 $1195 705 mike(s) $65 shipped many crystal filters at $65 shipped or $50 if with the OmniVI. Hercules II solid state amp (no p.s.) $
The Hercules II is sold. The Corsair II is not sold after all, ($400) and the OmniVI/opt3 is still available. ($1195) No more filters will be sold until the xcvrs are... 73 all and have a great week.
Now that the rigs are sold, I can finish selling the filters INRAD 754 and 755 filters. 2.8 kHz bandwidth at 9.0 and 6.3 MHz. Will include the INRAD audio mod, too. $133.85/set/shpd I also have anoth
A tentative deal on my 2nd OmniVI/opt3 has folded, so it is available. OmniVI/option 3 in excellent condition. Acquired from TT in March 2004. No filters but includes a 705 mike at the asking price o
The OmniV was a first attempt at microprocessor controlled radio. It was only partially successful. Nonstandard computer interface, but a pretty good CW radio, etc. Fixed offset/sidetone at 600 Hz. O
An easy way to add binaural CW would be to get a Timewave 599ZX DSP box. The current firmware has a binaural CW mode. I have seen these DSP boxes available used for ~150-200 dollars. The new firmware
The internal keyer in the Corsair II does NOT have an internal connection to the key line. One must use a patch cord to tie it into the key line: KEYER OUT to KEY. Use a Y-cable to allow an external