The 6.3 MHz filters are NOT used in the OmniA/C/D series xcvrs. Only the Corsair I, II and beyond have a bandpass IF section where those are used. I don't know about the Delta, having never had one.
Jim, the previous post is correct generally. But if you should decide to keep it and add the 1.8 kHz filter, you will need to cut a jumper on the edge of the outline of that filter. Then if you shoul
A recent post gave W8MIS as a source of the (no longer being produced) TT 236 cable. I recently got one and it is NOT what I really needed. I need a FEMALE 25 pin D connector beside the Molex job to
I am looking for an unadorned Argo V to purchase. Price must be no more than $600-ish and would prefer to include a Schurr Wabbler paddle (worth $175) as partial trade. 73 GT -- Allan K7GT Pleasanton
Well, now that the long weekend has come, I had some time to check out the amp problems. It turned out to have little or nothing to do with the amp but in fact was a loose parallel port connector on
I have a TT Scout F/S. A previous owner has added a power-level pot to the left side and the rig drifts somewhat. Both can be fixed by the technically adept. Full power and otherwise fully operationa
I have a second Scout F/S. Immaculate condition both mechanically and electrically. Complete with mike, all (160-10m) band modules, and mobile mount. $330 shipped. Price not negotiable. Will consider
I need a copy of the TT service dept instructions as to how to convert the Corsair II for QSK loop operation with TT amp (Titan, in my case). I have done the conversion on Omni-D and Omni-C in the pa
Having now sold both Scouts, I have several band modules for sale. 40m, 20m, 17m, 15m, 12m, 10m. Mix or match: $20 each or $38 for two or $55 for three or $100 for all, shipped paid CONUS. GT -- Alla
Due to a change in plans, I am selling one of my Scouts. TT Scout with band modules for 80, 40, 30, 20, 17, 15, 12, and 10m. $320 Mike, if needed, $20 Mobile mount, if needed $15. All plus shipping,
I have a TT 301 remote knob F/S. It is the kit version but almost indistinguishable from the factory item. $80 shipped, CONUS. GT -- Allan K7GT Pleasanton CA
The ongoing conversation on what Tentec should produce has been interesting. I would like to add my 2c worth. A follow-on to the Hercules II would be a great idea. Even a bit more power would be a go
As there is a Corsair II in my future as a backup rig, I would like to know of any 'standard' mods to be done to it. Someone recently mentioned (before I found one to purchase!) some sort of AGC mod.
The OmniVI has a definite sidetone key clicks problem when using headphones. No problem with speaker audio, however. I tried implementing the 'pull #52 terminal' fix but didn't like how it messed wit
This morning my pride and joy Hercules II decided to fail. Upon a key snappy 30 wpm QRL? it gave back a key-down 500W rather than a keyed QRL? ! Suspecting something in the control board but not havi
I have F/S 1. Omni-A, B series. Electrically excellent, puts out 100W+. Cabinet has some mars on the plastic top cover but the front panel is blemish-free. PTO is smooth and the dial cord is perfectl