I have been enjoying remote control of a Herc II from an OmniVI for some time. I have recently acquired a 2nd Herc II and would like to use it with the backup rig, OmniV. The issue here is that the b
I have both an OmniVI and OmniV. The VI has two ways to interface with the station computer. I have forgotten the TT names for these two output ports. One is through the 25 pin connector and the othe
As I will not be operating SSB with the OmniV, I am considering putting a 1000 Hz INRAD filter (9.0 IF) in place of the 2.4 kHz TT filter. The filter shape appears to be wide enough to allow a CW sig
I have an OmniV with the N4PY V.92 chip installed. Comes with owners manual, 705 mike, and power cable. $650, lower 48 only, plus shipping. Optional filters (I have them all!) at $60 ea. Also 961 p.s
I have a new in wrapping TT hand mike. Fits OmniV,VI, etc. Was for the Scout which I sold recently. $20 plus shipping. I think it is either a 700 or 701 (can't recall right now). k7gt@arrl.net -- 73
I have a clean OmniV with the latest N4PY chip (V.92) and even the numeric pad stick-on labels. I am interested in trading up to an OmniVI/opt3 to pair with my other OmniVI/opt3 for a simplistic SO2R
A question for 253 tuner users. I recently acquired two (2) 253 tuners to assist in automating my station. The instructions say to use interconnecting cables of RG174 for the QSK loop. These cables w
I am considering adding the INRAD roofing filter to my OmniV, a backup and beat-around rig (i.e., for contests!). I wonder how you did the in/out switching and what your results experience with it ha
I ended up with a 311 converter setup in the recent purchase of a Hercules II. The 311 converts the band info output of the Orion series to match the remote bandswitch requirements of the Hercules II
I will have about $800 coming from a gear sale soon and would like to find another Herc II to use as a spare and/or in a second operating console. I won't necessarily need the big power supply. It do
Gentlefolk of the reflector: I recently read the ARRL review of the Elecraft K3, finding it to have splendid specs indeed. One spec, though, that I found a bit high was the T/R turnaround time of 25
My backup Tentec rig is an OmniV. After my OmniVI returns from factory service and frees up the V, it (the OmniV) will be used for PSK31. I am absolutely inexperienced with PSK and would greatly appr
I am about to set up the backup rig (OmniV) for a while as the main one (OmniVI) is going for a ride to Sevierville. I know from the manuals that the computer interface cable differs between the two
I would like to trade for or purchase a 250 Hz filter for the 9.0 MHz IF (Tentec 219, 2019, or INRAD equivalent). I have an extra 500 Hz filter (9.0 IF) (217) which I can trade for it. I have decided
I am considering purchasing an Elecraft K3. This radio does not, unfortunately, have a QSK keying loop to directly interface with my Tentec amps. Does someone on this reflector know the delay in the
I am offering F/S my Scout package: very clean Scout 555 with Noise Blanker band modules for 80, 40, 30, and 20m 291 tuner (matches the Scout) 937 power supply extra power cable hand mike The package
I have a Tentec 253 autotuner (2KW) complete with manual and cables for sale. Asking price is $650. CONUS only (fairly heavy!). It is in very good condition. -- 73 Allan K7GT SW Oregon