I "Googled" CVS and found a pharmacy store, the closest of which is almost 1100 miles from here in Las Vegas. They also don't list the headphones on their web page. Does anyone have an alternate sour
I don't believe it's going to be quite that easy. The TopTen decoder either sinks or (with a simple mod) sources 12 vdc to a particular output pin depending on the input signal. You need to confirm e
Lee, The Alpha 91B is a great amp and will operate full QSK with TenTec rigs. Just connect the amp using its "relay" and "key out" to the rig's Tx out and Tx en. "Key out" goes to "Tx en". It couldn'
Rick, I don't think your problem is necessarily the computer OS. The shack computer here is an ancient Pentium 233/64MB ram/1 Gig HD/ Win98 with all updates and networked to the home computer and the
John, I have auto bandswitched a Hercules II and 253 tuner for several years with a Pegasus using N4PY control software. The band info comes from the computer LPT port into a band decoder. Works just
Jack, LOGic6 reads the Orion (mode, freq/band and tx split) just fine using the N4PY control program and the Pegasus file interface. 73 de Greg, K7KJ Greg Hodsdon Portland, OR k7kj@arrl.net http://w
Bill: I'll take the filter, if it's still available. Greg, K7KJ Greg Hodsdon Portland, OR k7kj@arrl.net http://www.qsl.net/k7kj -- Original Message -- From: "Bill Tippett" <btippett@alum.mit.edu> To:
Now that the capability to program the various AGC parameters on the Orion have been available for a while, I am curious as to what settings (hang, threshold, delay) people are finding satisfactory f
This was not my experience. I purchased a Murch transmatch new in the early 70's and it operated fine at low power for several years. After acquiring an L4B amp, the insulation on the roller coil fai
Loaded firmware version 1.345 twice and CW would not operate. Had to go back to version 1.342. Only tried LCW, not UCW. Anyone else have this problem? 73 de Greg, K7KJ Greg Hodsdon Portland, OR k7kj@
An even better option is an Orion, Pegasus and RX340. 2 TX + 4 RX (1 ham band and 3 gen coverage) Perhaps Carl will come up with a control scheme for this combo! Greg K7KJ Portland, OR k7kj@arrl.net
Mine did the same thing. I think the link from the FAQ is causing the problem. The Orion update page is OK. Greg, K7KJ Portland, OR k7kj@arrl.net http://www.qsl.net/k7kj -- Original Message -- From:
Tommy: One option you have is to wait for N4PY's Orion software release. Carl tells me it may be available by early June. I have been using N4PY software for the Pegasus/RX340 for two years now and c
Mike: My Orion behaves exactly the same way. BTW, the high noise level I was hearing during the TT net was due to a hail storm and not to my neighbor's air compressor. 73 de Greg, K7KJ Greg Hodsdon P
Hi Jim: I'm using the IR 752 (2.1khz) and IR 753 (400hz) filters in two of the optional filter positions in my Orion. The IR filters were surplus from the Omni Six Plus. In briefly looking at the fil
Grant: You might try the Alpha 89 setup as outlined on the Alpha Power website at: http://www.alpha-amps.com/html/tentec.htm Greg Hodsdon Portland, OR k7kj@arrl.net http://www.qsl.net/k7kj -- Origina
I am cleaning out my desk drawers and have the following Ten Tec manuals for sale: 1. Hercules amplifier, model 444 (this is the original Hercules amp)........$12.00 2. Titan amplifier, model 425 (ea
Model 238 antenna tuner (Corsair II color) for sale. I purchased this new 8-29-2000. Includes original manual. No dings, marks, scratches or anything on it; you won't find one in nicer condition. $35