I cant do it. I envy you. I would think most can't, hence the filters. I would imagine you were the exception, in my opinion. What a great talent! You are really lucky! If I could do that I would be
"Matching the received signal pitch to the transmitted has been a problem with narrow receivers for a loooong time. I had a Hint & Kink published in QST back about 1981 after a frustrating FD with fe
CHeck to see what Ten Tec is selling them for USED, and figure to knock off $200 or so. That is pretty much the formula for Omni VI, Paragon II, Omni VI PLUS(a real one). They are only worth what you
Send it back. The guy should be chastised for false advertising. Make him pay shipping BOTH WAYS. He should be ashamed. ANYONE who sells an option 3 as a PLUS (without disclosing the fact) is trying
C'mon , Walt. Of course you would have to talk to him first. Being it was his brother might change things. But we all know guys are doing this and it is just not right. That is the main point. Mark _
Dave, the problem is that there are guys who DO NOT disclose the fact it is an OPTION 3. If they know enough to call it a PLUS, then they know it is NOT a PLUS. This is an intentional act which is do
Here is another to watch for: Kenwood(perish the thought) made a ts 950s, a ts 950SD, and a ts 950SDX...... Current values about $1000, $1200, and 1800 respectively(plus or minus, please ...you get t
This was an issue which I wrote comments about at the Yahoo Omni VII group. John Henry, of TenTec, later had a new firmware revision which corrected this issue of the SWR meter showing 9:1 at times.
I recently bought an Orion 565. It is running version 1.372. Is there a way to determine if the sweep mod has been done without taking the rig apart? I dont remember if the sweep is a "one shot" on t
OK, thank you for that. Is there another way to know without doing a download, taking the rig apart , etc?? Thanks all. Mark "Hi Mark - If you load version 2.* software and the sweep works, then the
Mark hold the Menu button in and that will give you the 565 startup screen. The bottom line will say "V2 Mod Confirmed" if the mod has been done. OK, thank you all very much for your help. Mark K8VF
Thanks, Reg, that is the answer I needed! Mark _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
Before I did anything to the mic, I would try another mic if one was available. Is that a possibility? _______________________________________________ TenTec mailing list TenTec@contesting.com http:/
Up for sale or trade is my ORION 565AT. # 06c10753-UPDATED DEC. 2004! Factory tuner installed. It is in mint, unmarked condition, and working 100% May be operated with V-1 or V-2 firmware. I prefer V
Clark has it right. ALSO, sometimes the encoder connector gets a light coating of ??? on it which you can clean off . Try working the connector on and off a few times. It fixed my 2000 PLUS and saved
I think you'll like it (V-1)better ,John. Especially on noisy 160/75 meter bands. You'll like the way you can: 1-Set NR for 2-3, 2-add attenuator till "S" meter is at Zero, 3-And listen to nothing at
I would contact them and let them know that the noise is gone since they repaired the pole problem. maybe it will wake someone up. Even if it does not, they need to know that they have a responsibili
I have a 217 filter and a 220 ten tec filter available. Both guaranteed to be working 100%. 217 is a newer style, 8 pole. $65 each shipped. $115 shipped for the pair to CONUS. Best Holiday wishes, Ma
As of this time the filters are spoken for. Payment pending. Thanks for the interest. K8VF _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.conte
List it on qth.com, state the price and condx-be accurate, state price, and only sell to someone with good FEEDBACK. I have probably sold 100 radios in the last 10 years. NEVER had a shipping issue,