Sorry, Jim: It has obviously changed since I last used it. It came to me on the recommendation of a local computer store and I used it, successfully, without any of the issues you reported. My sincer
Has anyone else seen this? I received it as an email newsletter from Alpha. 73, de Mike, K9UW ALPHA AMPLIFIERS AND TEN-TEC MERGE UNDER RF CONCEPTS BANNER LONGMONT, Colo.- May 9, 2014 - Announcing tod
I received the same notice from TenTec that I got from RF Concepts/Alpha, but it arrived about an hour later. It appears that TenTec sent the notice to their newsletter subscribers. 73, de Mike, K9UW
Can you grab it from here, John? http://www.qsl.net/tentec/manuals/234.pdf 73, de Mike, K9UW Amherst, WI I have several Ten Tec stations and one of them is an Omni D transceiver and the Model 234 spe
QST published an article called "Amplifier Care and Maintenance" in September of 2003 and it is available (as a PDF) to members on their web site. The article includes a flow chart for diagnosing pro
Try http://n6ie.com/Ten_Tec_238.html 73, de Mike, K9UW Amherst, WI Here is a link to the web site for the 229/238 tuner mod: www.n6ic.com/Ten_Tec_238.htm Hope this works, if not simply Google TenTec
And I went from the K9AY loop to the Hi-Z 4 square. While the K9AY put more low band DX in the log than the TX antenna did, I seemed to hit a performance plateau after a year or two. The 4 square fro
Here's an elegant solution to the cable management problem, James. You can share your Centurion, microphone, key/keyer, speaker, etc., between the Jupiter, Omni VII and Orion II: http://www.w8zr.net/
Alpha built a small number of amps for use in commercial and medical research, using the 76A design platform. The front panel was labeled 76A but the literature described it as a "Chemagnetics Power
Tim, are you using the same coax jumper from the tuner to the 930 and the Omni V? If not, perhaps you have a flaky connector. 73, de Mike, K9UW Amherst, WI Well......I have an old TS-930S and it is w
Would this Decoder fit the bill? http://www.arraysolutions.com/Products/bandmaster.htm#top of page 73, de Mike, K9UW Amherst, WI Elecraft makes a band decoder called the KRC2. I think it's fairly gen
DXLabs provides the option of UCW or LCW. Go to SpotCollector's Configuration button, select the "General" and look for the "CW Spot" option on the left side of the panel. I'd assume that HRD would o
My 565 Orion knocks out electric fence noise, completely, with the Noise Blanker at its lowest setting. The offending fence is right across the road from me. 73, de Mike, K9UW Amherst, WI HF antenna
As Joe said, we all have our favorites..... I've had good experiences with products from ByteRunner. I've used their PCI Serial cards in the past and am currently using a USB/Serial adapter. It works
Would it be feasible to assign this function to the 302 remote keypad? 73, de Mike, K9UW Since my subject got changed, I will join the newer version. Barry, N1EU, wrote, "It seems like an easier fix
Art, which version of the firmware are you using. The "secret menu" does not seem to exist in v 1.373b5 73, de Mike, K9UW Amherst, WI On 1/6/2012 6:01 PM, art davis wrote: Hmmm...After re-flashing th
Pete, there is an article in the September issue of QST called "Amplifier Care and Maintenance" (pages 33-37). You can obtain a PDF from the ARRL web site if you're a member. 73, de Mike, K9UW Amhers
Let's try this again, but directed to the right email! Richard, there is an article in the September issue of QST called "Amplifier Care and Maintenance" (pages 33-37). You can obtain a PDF from the