I have a clean Pegasus for sale. I would like to sell as a package the Pegasus, model 705 desk mic, LDG AT-11MP external tuner, data cable, manual, and factory shipping box. Just back from Ten-Tec. $
Mark good morning. I'm in the process of wiring up a 756 PRO for soundcard packet, and noticed I forgot to give you 2 cables. All they are are 3 conductor to RCA patch cord's. You should note two thi
I'm having a strange problem with my Peg. I noticed that it wouldn't transmit on 17 to 10 meters, even though the red tx light was on, but no RF. 160 to 20 meters transmitted FB. I was testing this m
Thanks for the info Duane. The relay's are switching(clicking) as I switch bands. And appear to be working properly, or just as you described. I also noticed today that the heat sink get's very warm
One more thing, I thought I might measure the current now at 13.8 volt's on all bands once again with N4PY's S/W set to 20 watts out.... 160 to 20m 8 amps 1 watt out 17 to 10m 22 amps 0 watts out N4P
I also agree that it's looking more like bad finals every day. I was thinking of swapping the finals module from my Orion to test...Only kidding! It was kinda interestering to see the whole process u
Rusty doesn't drive a Ford anymore, he switched to Dodge this year. Hey I have to talk about something, my Orion didn't get here yet. I'm in the second group...... 73 Jeff kb2m, happy owner of a Pega
I haven't used my Peg in a week or so. Last night I powered it up to work some 17m. I found out that it won't tx on 17m and above, in CW, SSB , or tune mode. The tx light comes on, but no output. Thi
I forgot to mention that it transmit's fine on 160 to 20 meters. Just 17m and above has a problem. Sorry, I have a bad case of Orion fever.... 73 Jeff kb2m
I was there, and played with the Orion for about 15 minutes. It wasn't hooked up to an antenna. The level of the firmware in the demo Orion was ver 1.030x dated January 31,2003. The rig takes about 1
I have a Pegasus I would sell. The Peg was recently back to the factory for an alignment. I also have the matching model 302 remote keypad, and an LDG AT-11MP external auto tuner I would like to sell
Hey , I've had my Orion for about 6 months. I'm on travel for work about 1/2 the time. So I'm not totally up to speed with it as some of you guy's are, as I also am an extremely active satellite oper
I have an old manual from 1961 for programming the IBM ## accounting machine. I got started as a programmer with the IBM plug boards. I now have several programmers working for me, and when the argum
Try a program call quickmix to adjust your soundcard levels. http://www.ptpart.co.uk/quickmix/ You can then save soundcard configurations to use later, very handy and free.. 73 Jeff kb2m "line pointe
Good evening Ken. I would consider selling my 238A. I would like to get a new B model to match my Orion. My 238A is in excellent condition.Let me know if your interested. I'm out of town for work, I
My studio one is doing the same thing, I removed it from the audio-technica holder and some of the paint stuck to the holder....... 73 Jeff kb2m _______________________________________________ TenTec
Hmmmm. Jim, Me and at least 2 other people have the same problem with the black paint blistering on our Studio One's. I don't think I need a new one either, as it appears they all do that, so why bot