My Orion 565 has not been back to the factory since I purchased over two years ago. It was in the last production run. The only issue that I have had other than a few firmware bugs is an intermittent
I am looking for fully functional Ten-Tec Argosy Digital (II) and/or a Century 22 transceivers. I am only interested in transceivers that have been very well taken care of. Cosmetically and functiona
[Thanks everyone. I found an excellent Century 22. The search goes on.] I am still looking for a fully functional Ten-Tec Argosy 525D (Digital) and/or possibly a Delta transceiver. I am only interest
Thankfully someone wrote and reminded me that the Argosy 525D did not have the 25kHz calibrator option as the digital readout assembly is installed were it would be.... and with the digital readout i
I am looking for a fully functional 500Hz or 400Hz, 9MHz 8-pole crystal filter for use in the Narrow position of an Omni-V. The filter I want is either the Ten-Tec model 217 and was used in many earl
I need the physical dimensions for the Model 962 or 961 power supplies. This information is not in the manuals. I have an Omni-V and 962 coming to the shack and I have to modify a part of the shack s
Thanks to everyone who sent the dimensions. Great help (and going to be a close fit). 73, Jerry, KG6TT -- Ralph Jerald "Jerry" Volpe Amateur Radio Operator KG6TT ARRL Member & VE FISTS 12304 788 Ches
I'm looking for a nice condition T-Kit 1202 RF wattmeter. What you got... what you need to get it sent? 73, Jerry, KG6TT -- Ralph Jerald "Jerry" Volpe Amateur Radio Operator KG6TT ARRL Member & VE FI
Looking for a Ten-Tec Argosy 525D (Digital). - Prefer a serial number above 824 if possible. Your serial number? - Unmodified. - Fully functional. Full output. - Smooth PTO operation preferred, but I
Do you have any? In particular I am looking for Service or Technical Bulletins for the following Ten-Tec equipment: Century 22 (have QSK mod already) Omni V Argosy Argosy II Digital Centurion Centaur
Quote: "Dear Rick, With all due respect, I'm interested in finding out why you are using the Ten Tec RF processor with a 1000D when the 1000D has one of the best RF speech processors ever to be inclu
Wanted: Model 285 250 Hz 6.3MHz CW Filter. Do you have a fully functional one that is excess to your needs? I can give it a good home for a reasonable price. :) 73, Jerry, KG6TT -- Ralph Jerald "Jerr
Wanted: Model 282 (not 285 like I asked for before... that's the 500 Hz filter.... my mistake.... I really do know better). I am looking for the 250 Hz 6.3MHz CW Filter used in many Ten-Tec transceiv
Do you have a Model 310 Cooling Fan Assembly that is surplus to your needs. Let me know condition and price delivered. I can pay PayPal or Postal Money Order. 73, Jerry, KG6TT -- Ralph Jerald "Jerry"
Have one that you are no longer using? Please contact off reflector. If it is used it must be compete. State condition, filter included, price delivered. I would accept the kit with or without the fi
Still looking.... Do you have any of the following that you no longer need and would sell? Ten-Tec: Model 217 or 2017 500Hz filter (9MHz) Model 219 250Hz filter (9MHz) Model 310 Cooling Fan assembly
Refining my search.... 1) Filter needed: Ten-Tec #219 or Inrad #760 250Hz filter (9MHz) 2) Cooling fan needed: TT #310 Cooling Fan assembly Got one? How much delivered and whether you prefer PayPal o
Want RX-350 or RX-350D communication receiver. Please state if yours has the original or upgraded knob set. If you have one of these that is gathering a bit of dust.... consider giving it a new home.
Century 22.... genuinely very nice cosmetically (9 or 9+)... fully functional.... great PTO.... good dial string.... dial lamp good... calibrator and keyer installed too! I have looked at and owned a