I ran through this question of whether to get a Jupiter or a used Omni-6+. Eventually I decided to buy a new Jupiter (with internal auto-tuner). I already owned a Ten-Tec RX-350 and really liked the
I'd like to add one of the other to my N-2 filter position in my Omni-VI+. Jerald, KG6TT _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contest
On 20-meter PSK earlier today I received a report of unusual distortion on my signal. Sure enough I looked at my signal on a separate receiver using Digipan and one half of the audio signal was broke
I have an Omni-VI Plus, and Omni C and a Scout which I happily use for home and portable operation. I would like to put a Ten-Tec in my car for commutes and think that the best bet would be the Delta
Jerome: I have to say that I totally agree with Paul. I have been using the same CWType and CWGet programs for some time. For transmitting it is fantastic and for reinforcing copy reception it is not
I can only think of two possibilities for adding a Noise Blanker to a Scout or Agro that doesn't already have one: 1. Buy a Scout with the module installed and sell your Scout (or mix and match parts
When I bought my used Scout from you some weeks back I had requested a 701 microphone as part of the package. I didn't notice right away that I didn't receive the microphone. I checked the invoice an
That will teach me to send email's when tired. My email went to reflector instead of to Ten-Tec directly. Sorry _______________________________________________ TenTec mailing list TenTec@contesting.c
I am about 80% SSB these days but I hope to push in more CW time. Nevertheless I had a Jupiter and liked it for as far is it went. A very nice 'modern' transceiver with nicely above average performan
Yes, I use this kit and I think it is one of the best, if not the best accessory in my station. I built mine in a die-cast aluminum case. I added a fairly large double-pull, double-through 12v DC rel
Yesterday a ham friend of mine reminded me that I had some time in the past mentioned seeing an article on modifying a D-104 for use on lower-impendance mic input rigs... and that he wondered if I re
Parting with my trusty Omni-C Station to pick up a local bargain on a Paragon Station. Package Price Only (I am not a Weasel). Please don't ask for separate items! Ten-Tec Omni C with 1.8 and 500 hz
I just added a really mint Paragon to my station. It has all filters, FM board, Speech board and the Gheil chip too. Unfortunately it does not have the serial interface which would be of great use. S
Paul: PTO's incorporate temperature compensating components that theoretically cancel the drift changes of other components.... bringing relative stability. Trouble is they are never perfect and they
Well now that I have a Paragon in my Ten-Tec station (Along with an Omni-6+, 229B, two Scouts, a 526 and an RX-350) I have been trying to ferret out the lineage of the 'Giehl Chip'. My Paragon (built
To Vic, Jim and all who have replied! Thanks for your time and your info. This has been an interesting quest for information. Sometimes a bit confusing. However, yesterday my search really paid off a
Heh, I know finding an RS-232 interface board for my Paragon is gonna take some time. I may actually have to wait for a 'Weasel' to appear... or was it a 'Ferret'? Hopefully, someone will just redisc
In preparation for the time when I may need to make some alignment touchups (frequency readout accuracy, etc). I'd like to locate alignment instructions. My Ten-Tec manual is very comprehensive as fa
If you are working from the version 2.6 standard install you do not have most of the rig control features available. Especially for the Omni- VI (which I use). All these advanced features are in his
It is 5am and I am not able to sleep so you are all in for it! :( I recently did a bit of revamping of my shack placing two more HF rigs on line with my Omni-6+ (I also have two Scouts but they are a