Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Fri Jul 11 19:50:20 2003
yep - should have checked my screet - it is CWget - sorry. But I've found that with DSP NR on my OMNI VI (in atmospheric noise conditions) and a narrow filter, it performs well. Not as good as a huma
Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Tue Jun 3 19:04:16 2003
Anyone know the manufacturer and partnr for the male chassis mount mate to the standard 4 pin TenTec mic connector? Trying to make a switchbox to switch one mic (Studio One) to multiple TenTec Rigs D
Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Wed Jun 4 13:25:48 2003
Thanks to all that responded. My local Radio Shack did not have the part, but was able to get it on line from Radio Shack. Problem solved (or will be when I get the parts.) Thanks to all. (Can't use
Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Sun Jun 8 07:27:57 2003
I think RS422 is a 'bus' type architecture - i.e. you can have multiple units tied to the same port - the protocal is 'packet' oriented, and each packet has an address - so you may have a protocal pr
Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Fri Jun 27 08:46:11 2003
I'm real pleased with LOGic6 (www.hosenose.com). Been using it for about 5 years through several upgrades and works fine. Interfaces to both the TenTec Jupiter and Pegasus software, most Call CD's or
Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Wed May 21 19:05:11 2003
I've been using an RV deep cycle battery for the past 5 years to power an Omni VI+ and a Hercules amp. Using a standard 25 amp Astron pwr supply to keep the battery charged. I monitor the charging cu
Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Sun Apr 27 23:11:08 2003
S-meter readings on my OMNI VI+ are quite low - signals rarely go above S-9. Sensitivity appears OK. Everything else works fine. Any ideas before I ship it off to TenTec? Dave K5WNV
Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Fri Mar 14 16:27:37 2003
Well, I hope this doesn't start many flames, but I've had Win2K up and running (on UPS) for over a year running Oracle 8i with narry a restart or reboot. I thin Clark is correct - it's the system
Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Fri Mar 14 17:33:45 2003
The 'curious toy' you refer to powers 95% of all US Businesses computing needs. A secretary running Word, or an accountant running an accounting program under windows rarely has system crashes, prima
Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Wed Mar 19 15:31:54 2003
I own and use both theOmni VI+ and the Jupiter. Omni VI+ is great - have had it for 3 years, but the Jupiter is more fun to use. Although the Omni VI+'s receiver is somewhat better, there have been v
Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Mon Feb 17 16:05:57 2003
I'm currently using the new TenTec/Heil mic with my Jupiter. Sounds great based on on-the-air reports on 75 Meters. Also plenty of drive - full power with about 25% audio as indicated on the front pa
Author: lejeuned@centurytel.net (David W LeJeune, Sr)
Date: Wed Feb 26 16:21:27 2003
Sounds like your problem is in the laptop. I use a Dell workstation computer with my Jupiter, and it works fine, but have experienced problems with a USB to serial adapter. Always works on the standa
Author: "David W LeJeune, Sr" <lejeuned@centurytel.net>
Date: Sat, 15 Nov 2003 06:08:38 -0600
Using my Jupiter with N4PY and LOGic6 just fine. LOGic6 reads freq from pegasus.out in N4PY directory. Occassionally have problems with LOGic6 when it gets confused about the fonts. the the _________
Author: "David W LeJeune, Sr" <lejeuned@centurytel.net>
Date: Tue, 18 Nov 2003 08:58:39 -0600
I use the monitor feature periodically - helpful, to say the least. Yesterday someone told me that I had a 200hz 'subtone' on my signal. Put the headphones on and switched on the monitor, and sure en
Author: "David W LeJeune" <lejeuned@centurytel.net>
Date: Sat, 29 Nov 2003 21:35:53 -0600
Anyone know what the format is for the response string from the OMNI VI+ CAT port when the Continuous Data Echo mode is enabled (Menu 2 - CdE). Appears to be two types - with a 0 or 1 in the Command