Ernie, Try increasing the TUNE output power. 15w seems a little low, try 20 to 30 watts. 73, Mark 20 meters only I get no auto tune action at all. ie. Auto tune does not go through it's "relay adjust
You can get a nice mic clip (not a clip, but actually formed to fit a round mic - works great with my Heil GM-4) from Radio Shack for about $4 - at least I did a couple of years ago. Mark power mic's
There's not much. The two radios share several of the same printed circuit boards. I think I did see where there's a slight difference in the Jupiter receiver. Other than the front panel, there are n
John, I just sent in my registration ofr MixW. I didn't realize that macros of this type could be written for it, but that's something that I want to do. Could you share your macros with us? 73, Mark
Anthony, I think the Omni VI is the same. I know a several of the folks here are replacing the knobs on their Jupiters with the knobs for the Orion (direct from TenTec). They seem to be pleased. Mayb
Tim, I use a simple multi position switch. A few years ago, I came across some surplus project boxes. I think they had originally included crystals for changing frequencies of CB radios (sliders). Ea
I recently replaced the 218 filter in the N2 position of my Omni VI (opt 3) with a TT 219 (250 Hz CW) filter that I removed from an Omni V. The filter was purchased from TT in 2001 and was working wh
I wonder if the TT flash program is a 16-bit windows program as is their control program. We probably should encourage TT to update the flash program to 32-bit, especially if there are going to be an
I've been doing some experimenting (i.e. playing) and I think I have discovered that I can use my Icom 756 Pro as a bandscope display for my Omni VI+. I hooked up a patch cable between the serial por
Mark, First, you're welcome. I don't believe the Z11 has an input that can be used to trigger the tuning process as does the AT11mp. However, I think, but haven't checked it out, that you should be a
Tim, If you have a software progran that can do a spectrum analysis or waterfall display (lots of the freeware PSK programs will do a waterfall), run the audio output from your radio to a soundcard.
I'd like to use my Pegasus in this weekend's RTTY Roundup. I know I = could use the N4PY software along with contesting software, but are = there any programs that do RTTY and PSK contesting / loggin
-- StripMime Report -- processed MIME parts -- multipart/alternative text/html audio/x-midi application/octet-stream -- StripMime Errors -- A message with no text/plain section was received. The enti
I have had a very good experience with both the LDG AT11MP and the RT11 tuners when used with my Pegasus and other radios. However, I did not have the same results with the internal tuner for the Peg
Barry, Could you share with us how you run a response curve and how you determine the needed EQ. I would like to do some analysis work on my GoldLine / W2IHY 8 band Eq / Pegasus setup. Thanks, Mark