I just purchased a 'demo' 526 from TT. Tuning around, I found an S5 birdie with (signal with no antenna connected) at 146.645 Mhz. Is this normal? 73, Mark
CDF, The exact procedure will vary depending on the particular tuner, but here are some general suggestions. 1) preset the tuner to the approximate settings from the last time you used that frequency
I've been playing with my new 526 and it seems to be deaf on 2m. Gramted, I don't have a fantastic antenna, but repeaters 30 miles away that are 20 over 9 (i.e. full scale) on my Kenwood 7930 are onl
If it were black and white at the same time, that would indicate that the state of the bit was indeterminate, which isn't good for a low BER. If it's going to be black and white, it needs to be compl
Does anyone know if the receiver in the RX-350 is different from that in the Jupiter / Pegasus? Looking at the TT info on the web, the specs are the same, except for the sync modes ( which leads me t
As I continue my work on my own custom Pegasus control software, I have now incorporated the ability to play .WAV files through the aux input. This will allow me to use the computer as a digital voic
George, Thanks for your most informative post on speech processing. Please see my comments below: to S/N Are the distortion products inherent in the way the baseband signal is processed? Could approp
Jerry, Thanks to your post, I'm now beginning to understand speech processing. If nothing else, this is a great learing experience for me. Am I correct in assuming that the distortion is caused by th
Tom, I'd be interested in the details of your processing algorithm. I'm looking into using the PC as a DSP to process some pre-recorded .WAV files to punch them up and use as a DVK with a soundcard.
I just purchased used Omni VI (factory upgrade 3). My intent was to use my Omni V (soon to be V.9) as a sub receiver. While the RX antenna connection on the Omni V can be use for a 2nd receiver, that
Further info on my 1208 setup. I believe I have identified the source of the commercial broadcasts that I am hearing on my 1208 / Pegasus. Perhaps this will give someone a clue as to my problem. I co
Since the new TT radios are DSP based and since I am interested in developing computer soundcard based DSP software for my Pegasus, this really isn't that far off topic, but... Is there someone who w
I've been working with my Pegasus and have discovered that when I am in CW mode with a narrow filter (300 Hz) and no input signal (i.e. connected to a dummy load) and tuned to a multiple of 2.5 kHz (
I have been having trouble getting good SWR readings on my Pegasus when using the PT-11 intenal tuner. Especially on the higher HF bands, when the tuner would finish tuning, the Pegasus SWR meter wou
I'm continuing my investigation into the problem of the Pegasus displaying high (2.0:1 or greater) SWR readings when the PT-11 tuner believes that the antenna is tuned. Further to my earlier posting
Carl, Interesting comments that have made me rethink my (probably bad) assumptions. My assumption is that anything other than a 1:1 SWR was somehow causing more wear the transmitter - kind of like ru
Jerry, Thanks for the comments. I agree that my concern is what SWR the finals on the Pegasus are actually seeing. Now that I have the PT-11 removed from the RIG, I plan on rigging it up so that it c