Search String: Display: Description: Sort:

Results:

References: [ +from:markinkpt@hotmail.com: 66 ]

Total 66 documents matching your query.

21. [TenTec] Orion I with new 2.059d (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Sat, 09 Sep 2006 01:08:53 -0400
I had tried the first couple of V2 firmwares and ended up going back to the V1.37xxx due to my operating style. I work mostly CW and SSB. I loaded the new firmware on the Orion I and am glad to see M
/archives//html/TenTec/2006-09/msg00167.html (8,323 bytes)

22. [TenTec] AM drive level 2.059D for Orion I (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Mon, 11 Sep 2006 18:53:54 -0400
I noticed the drive level for AM has dropped. This causes my amp to only drive to about 50 watts on AM when I am used to driving it to 150 watts on AM. I sent this into dits n bits. I have read about
/archives//html/TenTec/2006-09/msg00284.html (6,945 bytes)

23. [TenTec] v2.059d rx noise (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Wed, 13 Sep 2006 18:06:41 -0400
Has anyone talked to Ten Tec about the RX AGC noise? I sent an email, but have not heard anything yet. I tried adding a little hang time, which helped some, but it caused me to have a hard time heari
/archives//html/TenTec/2006-09/msg00353.html (6,838 bytes)

24. [TenTec] Orion I v2.059d and v2.057 (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Thu, 14 Sep 2006 21:53:06 -0400
I have confirmed the same raspy RX audio on both versions on my radio. However, I do not have this with V2.056 or previous V2 software. I also talked to Ten Tec and they said they are not able to rep
/archives//html/TenTec/2006-09/msg00379.html (7,269 bytes)

25. [TenTec] V2.059d AGC settings for Orion I (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Sun, 24 Sep 2006 13:02:56 -0400
Well, since everyone has had a few weeks to play with the new AGC settings on the new firmware V2.059, I was wondering what everyone has settled with on the AGC settings on each speed (slow, med, fas
/archives//html/TenTec/2006-09/msg00542.html (7,329 bytes)

26. [TenTec] New Orion Owner (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Fri, 29 Sep 2006 19:11:25 -0400
Dave, Congratulations on your new Orion!! This is a reminder of myself last year at the Ten Tec Hamfest.... I bought one from them but had to wait until Janurary before I actually got the radio (some
/archives//html/TenTec/2006-09/msg00662.html (8,096 bytes)

27. [TenTec] Hamfest (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Sat, 30 Sep 2006 22:00:12 -0400
What a great hamfest! It gets better each year! I was so glad to meet folks I have QSOed with on the air and exchanged ideas here! It is also great to participate in the "hands on" tent to check out
/archives//html/TenTec/2006-09/msg00678.html (7,974 bytes)

28. [TenTec] Jupiter, W2IHY eqip, and Heil PR-40 (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Fri, 06 Oct 2006 22:08:08 -0400
I just got a Jupiter this past weekend at the Ten Tec Hamfest (what a GREAT hamfest!!!). I am going to use it as a backup to the Orion. I am wondering if anyone else is using this exact same audio ch
/archives//html/TenTec/2006-10/msg00162.html (6,984 bytes)

29. Re: [TenTec] 2.059d on Orion 565.....raspy rx audio? (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Sun, 15 Oct 2006 11:57:23 -0400
I am amazed at all the different answers to this question. Some are hearing the distortion, others are not; some in their headphones (in only one side), some on the internal speaker. To add to the li
/archives//html/TenTec/2006-10/msg00421.html (10,655 bytes)

30. [TenTec] Orion PEP (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Sun, 26 Nov 2006 23:24:04 -0500
I am working on an issue with an amplifier and need some info to see if my testing is accurate. I am running my Orion at 65watts carrier for driving an Ameritron amp. However, I am noticing that even
/archives//html/TenTec/2006-11/msg00394.html (7,618 bytes)

31. Re: [TenTec] TenTec] TX EQ = -14 dB for PSK31 (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Fri, 29 Dec 2006 14:53:44 -0500
I have found the ALC light not to be accurate unless the Orion I is set to full output. For example, while you have the power set at 100, talk into the mic and adjust mic gain until the ALC comes on
/archives//html/TenTec/2006-12/msg00785.html (8,199 bytes)

32. [TenTec] ALC action on Orion (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Fri, 29 Dec 2006 22:50:16 -0500
This is interesting specifically on the Orion's ALC action/settings. So, If I am understanding correctly, for my audio set-up, I set the rig at 100 watts and speak into the mike and adjust the mic ga
/archives//html/TenTec/2006-12/msg00807.html (7,026 bytes)

33. [TenTec] AM Power out on 2.059d (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Wed, 10 Jan 2007 20:53:16 -0500
I had posted awhile back that for those operating AM with the Orion, will discover the power out is minimal. I have been playing around with 160 meters and by chance keyed the rig in AM on that band.
/archives//html/TenTec/2007-01/msg00269.html (7,215 bytes)

34. [TenTec] transmit freq response Orion I V1.xx vs V2.059 (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Fri, 19 Jan 2007 17:37:04 -0500
Does anyone know if the transmit audio response of the Orion I's V1.373b5 is the EXACT same as V2.059d? If not, how far off? Thanks, Mark KA4ICK ______________________________________________________
/archives//html/TenTec/2007-01/msg00586.html (7,334 bytes)

35. Re: [TenTec] Orion RX and Monitor "Going To Sleep" (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Mon, 19 Feb 2007 17:34:48 -0500
I have had this issue a few times. However, I have gotten into the habit of taking the headphone plug and run it across the mic connector on the radio before plugging the headphones in. Kind of a dis
/archives//html/TenTec/2007-02/msg00311.html (7,347 bytes)

36. [TenTec] Ten Tec at the Charlotte Hamfest (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Sun, 11 Mar 2007 15:01:08 -0500
Well, I just returned from the Charlotte hamfest and had a GREAT time. It appeared there was lots of VEC testing going on, so we may be hearing new folks on the air soon. The usual flea market crowd
/archives//html/TenTec/2007-03/msg00265.html (8,481 bytes)

37. [TenTec] Orion I and RIT (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Tue, 13 Mar 2007 15:55:31 -0500
I have experienced the problem with the RIT control several months ago and it went away after loading 2.059d and doing both of the resets. It has worked flawlessly for months. I started trying AM out
/archives//html/TenTec/2007-03/msg00303.html (8,806 bytes)

38. [TenTec] Info about Hercules II (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Sun, 18 Mar 2007 17:54:43 -0400
What is the keydown output of a Hercules II amp? Is it the same on all bands? What about PEP? Does it have good swing on AM? Will the new Ameritron switching power supply work on this amp with full o
/archives//html/TenTec/2007-03/msg00457.html (7,046 bytes)

39. Re: [TenTec] Orion I, 2.060b, raspy audio? (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Tue, 01 May 2007 23:40:04 -0400
Ken, Yes, I hear the same thing. I just noticed tonight that maybe there is an association with the AF level. I actually have heard this in previous V2 versions, but only after they activated the slo
/archives//html/TenTec/2007-05/msg00043.html (7,753 bytes)

40. [TenTec] Firmware version: 1.011 for Omni VII (score: 1)
Author: "Mark DeBord" <markinkpt@hotmail.com>
Date: Fri, 04 May 2007 16:51:20 -0400
new release Mark _________________________________________________________________ Need a break? Find your escape route with Live Search Maps. http://maps.live.com/default.aspx?ss=Restaurants~Hotels~
/archives//html/TenTec/2007-05/msg00109.html (7,010 bytes)


This search system is powered by Namazu