For Sale: Ten-Tec Orion 565 This Orion is in excellent condition both electrically and cosmetically. Included are: Ten-Tec 1.8kHz, INRAD 400 Hz, and Ten-Tec 250 Hz roofing filters New Ten-Tec blue sc
The Orion 565 definitely has a NB "The ORION is equipped with a DSP noise blanker that is independently adjustable for each receiver." The Orion 565 also has a hardware NB "Separate from the DSP NB,
John, "To adjust the DSP noise blanker, press NB. A value of 1 through 9 will appear on the screen just above the NB button. Use the MULTI knob to adjust the noise blanker value from 1 to 9. A higher
Thanks to all who expressed an interest. 73, Marsh, KA5M For Sale: Ten-Tec Orion 565 This Orion is in excellent condition both electrically and cosmetically. Included are: Ten-Tec 1.8kHz, INRAD 400 H
Hi Gene, I'm not sure of the "level" of your question. If you are asking about the basic CW and WriteLog setup, you'll need: 1. A real RS-232 port in your computer, ** OR ** a USB to RS-232 converter
I too, not so long ago, had a similar experience with Ten-Tec Repair for my Orion II. The repair was fast, cost was very reasonably, and my issue completely fixed. Marsh, KA5M Just want to let everyo
1.5.10 SERIAL INTERFACE The SERIAL INTERFACE provides for a connection of JUPITER to a COM port on your personal computer, via a standard 9-pin serial port cable. Marsh, KA5M Anyone know the cable p
Ten-Tec Service is very much alive and well. I sent a message today to Ten-Tec Service asking about a serial cable for a Ten-Tec transceiver. Exactly 15 minutes later I had a reply from Ten-Tec Servi
service@tentec.com 73, Marsh, KA5M --Original Message-- From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Rick Cochran via TenTec Sent: Friday, June 30, 2017 7:03 PM To: Discussion of
The Ten-Tec 562 Omni V manual is available for download from the Ten-Tec Website. http://www.tentec.com/ http://www.tentec.com/wp-content/uploads/2016/05/Model_562_Omni_V_Manuala8eb.pdf If only a pri
Yes, the O2 front panel is okay. 73, Marsh, KA5M --Original Message-- From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Mike Dishop via TenTec Sent: Tuesday, February 21, 2017 2:36 AM
I had an Omni 6+. Great radio at the time. But my current Orion and Orion II are better and easier to operate. 73, Marsh, KA5M The front panel ergonomics on the K3 is a nightmare compared to the Omni
Rick, My Ten-Tec Orion II has a black front panel and white lettering on the knobs and buttons - great contrast and easy to read. Yes, for me the Orion II is easier to operate than the Omni VI+ was.
Barry has it right, as usual. Windows XP, Vista, 7, 8, 8.1, and 10 will all support a serial port. Your laptop may not have a physical serial port, but if it did, the OS would support it. But your la
Carl, If the Eagle has a USB port, and a computer has a USB port, why is a driver for the Eagle required to make its USB port appear as a serial port? Just curious. Marsh, KA5M The Eagle has a USB po
599 USB to UART Installer for 64-bit Windows http://www.rkrdesignsllc.com/static/media/documents/tt_599_USB64.exe 599 USB to UART Installer for 32-bit Windows http://www.rkrdesignsllc.com/static/medi
Eagle 599 USB to UART Installer for 64-bit Windows http://www.rkrdesignsllc.com/static/media/documents/tt_599_USB64.exe Eagle 599 USB to UART Installer for 32-bit Windows http://www.rkrdesignsllc.com
Have you tried service@tentec.com ? Marsh, KA5M --Original Message-- From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Pakulski-K9VON Russ Sent: Tuesday, March 01, 2016 11:39 AM To: te
Well, I sure hope Ten-Tec is still repairing Ten-Tec equipment. I just sent them my Orion II for repair today. I had sent an e-mail to service@tentec.com requesting an RA number, and had gotten a rep
If anybody was wondering about Ten-Tec repair times, this was my experience.... I shipped my Orion II back to Ten-Tec for repair on March 1. They called me on March 9 to tell me my transceiver was re