You might check your AGC settings and see if you have enough gain for small signals. On my Orion II if the threshold is set too high it could cause too low an audio output with small signals. 73, Mik
John H. Graves II, WA1JG/SK, was a long time Ten Tec fan with a large collection of Ten Tec and other equipment, and a subscriber to this Reflector. His son Matt, has asked for help with offering his
Hello Ten Tec Fans: To those amateurs that follow this reflector and would like to post: You must subscribe to post to Ten Tec. Please include your call sign with your subscription application. Tnx a
For those amateurs following the reflector but are not subscribed: You must be a subscriber to post to the Ten Tec Reflector. Please include your call sign with your subscription request. Tnx and 73,
Hello Ten Tec Fans My normally reliable O2, sometimes returns from transmit to receive with a lower sensitivity. Switching back to transmit, and again to receive, the normal sensitivity returns. It a
Hello John, I notice that the Orion II 566 is not listed as a supported radio. I need a K6 Reed Relay for the A1 low pass filter board. Do they provide part information if the relay is unavailable? T
Hello Ten Tec Fans My normally reliable O2, sometimes returns from transmit to receive with a lower sensitivity. Switching back to transmit, and again to receive, the normal sensitivity returns. It a
And I should add that they will be building the Emtron amps somewhere, perhaps at Ten Tec. Emtron will not be exporting amps to the US. They will be FCC compliant and built here. 73, Mike W2AJI Sent
John, Here is the supported equipment list. Support Support & Service Welcome to the Dishtronix support page. We are committed to providing our customers with the best possible support. An essential
Hello Ten Tec Fans, This is my usual reminder to amateurs who wish to post to Ten Tec. You must subscribe to be able to post. Please include your call sign with your subscription request as stated in
What I said was: "With good quality cable, the center conductor is not radiating. However, the shield may indeed be carrying current." I don't think you have my meaning and have taken it out of conte
I have been using Parallels on my OSX Mac for years to emulate a Windows OS. Currently running Windows 7 on my MacBook Pro laptop. There were numerous bugs with Parallels that made this a challenge w