I have an Orion on order and want to get a set of headphones (No microphone) that work really well with it. I am using 8 ohm Yeasu stereo headphones with my FT1000MP. I would appreciate any comments
I have a new Orion on order that should arrive soon. My hat is off to Ten-Tec for planned release 1.370! Looks like a grand-slam hit! Thanks & 73, Merle Merle Bone 12549 Bickford Dr. St. Louis, MO 63
If you're planning to build out a full interface for the AUX/IO connector on the Orion, check out the BUXCOMM 8D cable. It has an 8 pin DIN connector prewired on one end, with the other end untermina
I just wanted to let other Orion owners know that I completed a Rig-Blaster Plus interface to the Orion today. I bought the 4 Pin to 8 Pin conversion kit with the Rig-Blaster Plus. The jumper drawing
Taylor, More Data points on 1.37: I have been using Sweep without any problems, although issues with Sweep have often been coupled with other activities going on simultaneously. I've been using "DX s
I checked further, with different settings, and it appears that LSB mode is transferred in either direction, B>A and A>B, but USB mode does not transfer. Looks like a possible problem. Merle Bone W0E
I think Tom, W7QF, made some excellent observations with respect to "contest performance" of the Orion. I think there are a couple of other comments that may be of use. I think a useful way to think
Phil Howlett said: " the way the radio is now it is user vicious." The Orion is my first Ten-Tec rig and I enjoy reading this reflector and often learn things from it. I have to say that I think Phil
almost identical to the spectrum with the 20 kHz filter selected. I tried adjusting the 250 Hz filter centering over the entire +/- 250 Hz range and saw no change in the spectrum. Congratulations Mar
I am running 1.371 and don't see any problem with the roofing filter control software. It sounded like, from his last note, that Mark has his working also. I think, at this point, it looks like there
That wasn't what I was saying. Yes, sure the 1.8 KHz roofing filter is useful in contests or just 75M at night :-) .........I work a lot of SSB and normally manually switch in the roofing filters rat
N6KB said: "Tom, I agree with you on a lot of the points you have made. I am sure you will get a lot of responses from people calling you "backward" or saying that if we all had your attitude we woul
Actually, the Orion does do 10 meter FM .................................................................. Thanks Carl. So the Orion's CPU's also do "FM Modulation and demodulation." Merle - W0EWM __
Mario, I really don't make much of a distinction between which of the CPUs are involved in performing the function digitally. While it is true that the general purpose processor has a different instr
I wonder if anyone might know how to change the Radio.INI file in DXBase2004 so that it will set the "PBT" when it moves the radio to a spot. I'd like to get it to set the "PBT" differently for CW an
Does anyone know if the Receive antenna input on the Orion is disconnected from the receiver during transmit? If so, does it reconnect when the receiver is turned on when the transmitter is in QSK mo
Grant, I ran the AM TX test "I think" you wanted. I was using a V1.37X version on the Orion. I varied the TX bandwidth from 3900 down to 900 while talking into the mike and transmitting, in AM, into
Hank, I think you are taking this way too "personally and/or seriously." It is a hobby. I think the people here are trying to understand some "unexpected" operational results in Beta software (On the
"Don't read QST or eHam reviews. Learn to read ARRL's Expanded Test Reports. The real unvarnished data is there if you know how to interpret it." I have to agree with Bill. The "subjective data" is a
Rob - K5UJ said: "Some hams obsess about BDR etc. beyond what 95% of hams give a flip about. For those 95%, whether a rig is "good" or "bad" boils down to what I call the pleasure rating: on a scale