Considering trading my Omni VI Opt.3 with extra filters and tcxo for a Paragon 2 Pictures available upon request my radio is is very very nice condition. Swap is for transceiver only no mic nor pow
I have a palstar tuner and as a tuner think it is great. BUT !!! mine the model AT1KP has a really crappy balun. The balun fried at 600 watts and is grossly under sized. To make matters worse the use
I agree with a few others on the speaker selection. My stock in the radio speaker sounds sad and pinched. But i have a 8 inch Woofer in a box that i use for a external speaker and it is much more p
Looking to swap my Omni VI opt#3 for a Paragon II Mine has 6 filters The new and vastly improved VFO soft touch Ring and Fan kit. Only wishing to swap the radio no power supply or keys or mic's.
Let me lay out the question I installed a center feed dipole it is 138 feet long. Feed with 450 ladder line. Using my Palstar AT1KP tuner which I have raved so much about it tunes this antenna on 16
Hey might most gracious and sincere thanks too every one that responded. Paul from Palstar insisted that it was not his balun but seems every one else and i do mean EVERY ONE ELSE And that was over
You know guys i love TenTec aswell. But if you want top notch receiver performance and even better goodies and way more updates. And save a few bucks at the same time get a loaded K-3 Bingo you are
"It would sure seem that TT could kill two birds with one stone by allowing 3rd parties to write code for their radios." I agree the other fine American radio manufactures seem to be have huge amount
Hello David. Any radio that can work on the 20 meter band will work with that transverter. It simply uses the RF out of the radio to drive the transverter. But your question about the possibilty of o
For those of you who would rather not mess with the wiring in your radio. There is a easy fix i beleive...It is called a Null Modem Adapter, This adpter simply crosses lines 2 and 3 for you. Ok it mi
Hello Folks i realize this is not a TenTec question and i am sorry about that. Allthough i am a very proud Red dot owner. Any how here is my question. I am preparing as we speak a doublet antenna and
Omni 6 Opt-3 gaining power out Ok I have a rather odd problem. My Omni6 Opt-3 really has two problems I guess The built in meter is only showing about 60 watts out in any mode I try. Yet my trusted
The Titan IIII ???? Wondering if TenTec will be replacing the Titan III with another high end amp. We can certainly hope if they do they revert back to the original Titan model that ran the 3CX800
Wanted Transformer close to 1500V @.750Ma Hello Folks I am looking for a transformer that is 120 volt primary and around 1500 volts on secondary with at least .750Ma rating. I do not want any mic
Well Mike i think you answered your own question. I have heard that the Jupiter is a "Pegasus with a Front Panel" I have a Pegasus and like it, but I miss having KNOBS.
To reiterate on the comment made buy WO8L about the selectivity part of the Jupiter. I will state it was that exact reason why I gave up on my Jupiter and sold it. While I am not a contester I do enj
I have a 1208 transverter w/manual would like to trade even for a 705/706 Microphone. Transverter is fine condition no issues at all and manual is orginal unit was factory built. Looking to even trad
Send TenTec mailing list submissions to tentec@contesting.com To subscribe or unsubscribe via the World Wide Web, visit http://lists.contesting.com/mailman/listinfo/tentec or, via email, send a messa