Jerry, now that was a good objective review of your experiences and opinions about Ten Tec radios. Well worded and a good read. Thanks. I am a Ten Tec fan and enjoy my Paragon and Pegasus but have be
I think the death of the novice class sounded the end of CW only rigs. With CW requirements going the same way a CW only rig would not seem to be profitable to manufacture. The only group keeping CW
I am using a 961 power supply to power my Pegasus radio. When I use full output power it sometimes trips the power supply on a voice peak. Since the antenna is less than 1.5 SWR I doubt it is because
I Agree Mike, that 5 watts is no big deal. However, the fact the power supply trips out at 100 watts indicates a problem. Would you buy a radio with such a problem? I would like to investigate the pr
True ... some testing is in order to see exactly what is going on. William Lee N5WRX There is a pot inside the power supply to set the trip point. The real question is how much current is the supply
I want to thank all the contributors to this reflector. You have helped me more than you can know. After reading about all the problems with the Orion I have decided now is not the time for me to buy
I normally leave the power supply on but the other day it was off overnight and the Paragon lost its memory. I replaced the 9v nicad battery and left it on all day to charge. Still drains the battery
I think Jerry's comparison of this group to a movie theater is a poor one. Most of the people here like Ten Tec equipment. They like the product as well as the companies policies and attitude toward
Ron, I just bought one from Ten Tec. William Lee N5WRX Since due to bad timing I just missed out on the one recently posted here... If anyone on the list is planning to seek a new home for their Cors
Jim, why the Omni C before the Omni D? William Lee Hi Ken, I think all of the TT's before the OMNI V, Paragon are non-digital except for the display on some. My choice would be 1st a Corsair II, 2nd
You are right! I am not the Lee ou are repling to butt ..... Already I am thinking a nice Microsoft pastel instead of that drab color of the Jupiter. William Lee -- Original Message -- From: "Brad Br
I just noticed that AM is not a mode of operaton supported by the Paragon. There is an AM mode button on the panel and the radio will select the 6K filter in that mode and will respond to the tune bu
As I recall the Yeasu FT-101 series had AM mode and was very popular with CB'ers. I was into CB radio in my high school days (60's) and wish just one of my friends was into ham radio as I would have
After putting up a Cushcraft R-7000 that happen to my cable modem also. It sat less than 15" from the radio and coax. Stray RF was the cause. A good ground and an antenna tuner cured the problem. Wha
My Paragon makes a click or pop sound from the speaker/Power supply (961) when I press the PTT button and start talking on SSB. Is this a normal thing? William Lee N5WRX
Murray has a nice one ... radioranch@qth.com William Lee N5WRX If you have one available please indicate condition, filters, included and price. Thanks. ______________________________________________
Are you loading into a dummy load? If not check the SWR on your antenna. William Lee Hi All, Well I got my Omni A on the air tonight and It seems ok except the ALC doesn't work properly. If I turn th