Hi John, Thank you so much for your email -- I knew there was someone out there had a source. After about two days I finally did get a reply from Paul Clinton at TT and they actually have the TL442's
Looking for someone who knows and understands the innards and outards of the TT Corsair I ALC circuit. On the Corsair I, I am refurbishing, The ALC controls do not seem to function. At first I though
Hi Donnie, Yep that was the problem --all is well now. Thanks for your email and suggestion. 73's Pete N6QW Pete: Did you first check for damaged diodes D1 & D2 on the SWR board? That may be your ALC
This is a stretch but I need a set of the plastic end caps that attach to the Corsair I front panel. Please respond to radioguy90@hotmail.com. 73's Pete N6QW
Looking for a source for the following parts TL442 as used on the 80975 Board CA3053 as used on the Double sideband generator YES I did talk to Ten Tec Service and they stated they don't stock many C
Looking for a front panel for a Model 540. Lettering in tact, no corrosion or extra holes would be ideal. Would also consider buying a junker so long as the front panel is OK as above. 73's Pete N6QW
Am looking at a project to upgrade a Model 540 to a Model 544 insofar as the digital display feature. The AADE digital display kit (modified) is what I am looking to use on the project. Before I rein
What is the exact frequency of the 8 pole crystal filter used in these radios? While it is described as 9.0 MHz the service data seems to indicate the center frequency is around 9001.700 KHz. Thanks
Before I take out the Golden Screwdriver and really mess things up --thought I would test the list to look for divine guidance. I have a Omni 6+ Opt 3 that has been inactive for several years. I put
Thanks to all who responded. The problem is fixed and here is why. The manual I have is for the Omni VI and it is silent about once you get the Choose on the display you must push in 1 2 or 3 on the
I noticed in the new amp info page that TT states it is a companion to the Model 539 QRP radio. Any more info on this radio -- my chief interest is the price point. 73's Pete N6QW
1) Has anyone installed an internal digital dial in a model 540 Triton IV? 2) Does the Model 540 have the extra bandswitch wafer such as you would find on the Model 544 so Band information can be pro
In the latest round of lets clean up the shack, my Corsair I is next to go. The radio is in decent shape and is operational. If anyone on the list has an interest contact me direct at n6qw@jessystems
Thanks to all of you who made inquiries but the radio has been sold. I only regret I didn't have a whole shack full of them based on all of the interest that was generated. 73's Pete N6QW
Time to thin the herd. I have too many radios and not enough space in the shack. Thus I wanted to see if I could find a good home for one of my radios. The radio is an operational Triton II with matc
For those who would like to see an X-Lock-2 installation in a Ten Tec Corsair I click on the link below http://www.jessystems.com/X-Lock%20(rev%201).pdf Basically the X-Lock is a refinement of what i
Hi Charles, In my installation I am using the varactor that was already installed in the PTO assembly. So all I am doing is adding a bias voltage to one of the pins on the Corsair I PTO assembly. I c