So what we seem to have is a company who has made engineering department a higher priority than the advertising department? NOT PERFECT! But, as they say, it beats the alternative. 73, Jeff - N8CC __
Dave, I've noticed the same weighting issue on two Omni VI's (Opt 3) I've owned. Both very good CW rig's otherwise, but the dit/dah ratio's range of adjustment on the internal keyer, was all on the "
Greetings I traded in one of my Omni VI option 3's on an Omni VII. Now I have three TenTec filters available. All are 6.3 mHz, models 282,285 and 288. Price is $50 each. If interested, contact me via
The filters are spoken for. 73, Jeff _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
I'll try this again: The filters are sold, folks. Guess my earlier post went in the 'bit bucket' somewhere along the line... sorry. Jeff - N8CC _______________________________________________ TenTec
Dell is quite correct. I don't know if TT ever corrected this in their later manuals. On page 5-1 of my manual, the DB-9 to DB-25 diagram (on the right) should have the wires on pins 2 and 3 swapped
Steve Halliburton wa2soc asked: Has anyone had any success with running the OMNI VII One Plug software under Linux? Steve, A friend of mine has successfully run OnePlug using a virtual Windows XP mac
Sorry guys, I made a mess of that. Must've been too tired to be posting. The crux of it was, One Plug works in Ubuntu with VMWare. 73, Jeff - N8CC _______________________________________________ TenT
Guys, If you stop and think about it, less than 1/10th of a turn beyond 'finger tight' is precious little. It is, however, enough to make a difference. My experience has been, if I go 'just a smidge'