Anyone using a Icom 756 Pro series radio with a Hercules II amp? If so I would like to compare notes and see how you set it up for QSK operation and just general impression of the pair and how they w
I have a 3 week old IC-756Pro III that is absolutely mint in every respect. Very little use, comes with everything as new from the factory. I would like to trade it for a late model (with TCXO) MINT
Steve, Sounds like you need a PTO rebuild.. the old grease in there has hardened and is most likely causing your problem. Ten Tec will rebuild it for you, or they will sell you a rebuild kit for abou
Has anyone on here used an Orion with a Hercules II amplifier and if so, have you made a cable to allow the amp to follow the radio (if it is even possible) when switching bands? Thanks Tim NZ8J ____
I bought a interface kit from Larry Riley N8MIS to connect my IC-756 Pro III to my Hercules II to allow the Herc to track the Icom when switching bands. I no longer need the kit, never had a chance t
Nice condition, overall at least an 8 in appearance and works as it should. 90-110 watts out on all bands. It has the factory upgrade to include the notch control and xtal selectivity boards. There a
If you have one for sale please send details to include price shipped to zip 45324 Thanks Tim NZ8J _______________________________________________ TenTec mailing list TenTec@contesting.com http://lis
The Omni has been sold, thanks to all who responded.. 73 Tim NZ8J -- Original Message -- From: "NZ8J" <nz8j@woh.rr.com> To: <TenTec@contesting.com> Sent: Friday, October 21, 2005 10:05 PM Subject: [T
Looking for the remote control head for a Ten Tec Hercules II HF amplifier. It is Ten Tec model number 9423. Would like the control head and cable to the amp, but will take the control head only. If
Looking for the remote control head for a Ten Tec Hercules II HF amplifier. It is Ten Tec model number 9423. Would like the control head and cable to the amp, but will take the control head only. If
I'm trying to use the Orion aux input (DIN jack) on the back to work the digital modes, does the vox work like it does on the Argo V or do you need the PTT line activated? I can't seem to get it to k
I hooked up my Signal Link SL1+ and used the PTT output on it to key the Orion.. everything works fine now... still like to know if the vox is supposed to work with the aux input... 73 Tim NZ8J -- Or
Thanks Barry and all the rest of the folks who offered suggestions.. as these things often go, it was more operator error than anything else... I had somewhat of a kluge setup between the Argo V and
Does anyone have a schematic of the Ten Tec model 311 band data converter or the pin out for the DB 25 output connector on the 311? I just bought a new one from Ten Tec and it came with very limited
Have decided to downsize and simplify the station for a while.. Ten Tec Orion 565/AT has internal tuner and 1.8 roofing filter. Has most recent hardware updates as of 10/05. In excellent condition, A
Lots of cw ops here so thought I would see if anyone has an old Autronic's single lever paddle that they would part with. If so please email with particulars.. thanks Tim NZ8J _______________________
I have a like new K8RA Iambic Paddle model P2 for sale. It is a very nice key, look at the eHam reviews under the K8RA paddles. Also check out his web page ( http://www.k8ra.com/index.htm ) for all t
The paddle has been spoken for.. thanks Tim NZ8J -- Original Message -- From: "NZ8J" <nz8j@woh.rr.com> To: <TenTec@contesting.com> Sent: Tuesday, November 29, 2005 7:18 PM Subject: [TenTec] FS: K8RA
Looking for a exc condition Omni 6 + (or Omni 6 option 3) with cw filters. Want one in exc condition physically, no marks or scratches and must work 100% electrically. If you have something like this
Just another FYI.. Had a problem with my RS50M today.. started getting all sorts of RF in the rig... I tied the negative post to the small ground lug below the neg post on the supply.. still had RF..