Bill They made a slight wiring change in that board, at some time or other, switches in one of my units is as he described. the other is not Also I do not use N1 or N2 to activate, I use the processo
Sounds like you need an Autek RF Analyst or one from another mfgr with same capability. As far as I know TT does not have one but you can check first, they may market one. With it you can adjust your
TT supplies a great quiet fan that clamps on the fins, if one is to operate for longer times, ie: FD or Contest work. One would be FOOLISH not to use one. Lyle -- Original Message -- From: "Gary Hoff
Good point Marinus, I had occasion one time to need Keying Compensation on a new digital rig. Not to be confused with Keying Delay or Weighting, I ended up with the MFJ 495 which is a great keyer. Ma
Ten Tec Omni VI+ Model 564 Excellent condition both operational and appearance. Manual, pwr cable, mike. International Radio Roofing Filter 763 (600 Hz) Filters in PBT: 1,8, 500, 250. With roofing fi
Ten Tec Omni VI+ Model 564 Excellent condition both operational and appearance. Manual, pwr cable, mike. International Radio Roofing Filter 763 (600 Hz) Filters PBT 1.8, 500, 250. With roofing fil
Been quite a discussion on connectors, does anyone know if there was a specific reason for the making and/or developing of RG87A? And then its demise. One could be cost of course but since it was use
For Sale: Two Ten Tec Omni six plus Model 564. Both operational and excellent in appearance except as noted below. Number one: Serial 06A10337 International Radio roofing filter #763 (600hz) TCXO Pas
Ten Tec Omni six plus (Model 564) Serial 06A10337 International Radio roofing filter #763 TCXO Pass Band tuning board (6.3 MHz) 2.4, 1.8, 500 9MHz 2.4 Power cord with ckt bkr, mike and manual One sma
Thanks Donald, K6RV, for sharing the Jack Curtis award info with us. I used to get so disgusted with Naval Communications for not sanctioning the use of Paddle keying. All because of an early evaluat
One can use all sorts of spark plugs & things to drain off those little sparkies mother nature puts out, however its hard to beat a DPDT heavy knife switch. For over 25 years I had a 3 wire Rhombic u
Ron, the switch was enclosed, this was not a back yard antenna it covered over 10 acres. This was a classic point to point rhombic, as used by the press wireless or Military people. No problems in ov
Right on Ross Starting out I used an "A" battery for filaments and a "B" battery for plate voltage. Still use a cw tube rig I built not too long ago, once in while. New generation of hams are like th
Old hams not being able to copy CW? Old in age or old in terms of being licensed. Which is it? Or are both being lumped together? Big Difference Equipment: some of the older will do what some of the
Your right, most not. -- I am using the free version of SPAMfighter for private users. It has removed 24 spam emails to date. Paying users do not have this message in their emails. Get the free SPAMf