A piece of brass tubing in the appropriate size from your local hardware store will also work slick as snot. If you are too cheap to purchase a piece, some of the brass tubes inside a pen will work.
SeaBond strips, or another brand of denture adhesive might help.... Sorry, couldn't stop myself I have recently adapted various electret head sets and microphones to my Orion 2, running 2.041XT, and
--I think there is a business here... [BC] What if , a site was created: TEN-Tec for Elecraft.swap Get all the people who hate their radios to swap with the other side who hates THEIR radios. The sit
Call Paul at TenTec. He has never steered anyone wrong as far as I know. He is more Than willing to point you in the right direction. One of the procedures he told me to try on my OMNI VI+ was "not r
seems the radio works, but not with someone else's software, so that means it's a problem with Ten-Tec's software???? Call N4PY seems more appropriate I think I've found a problem with 2.063Xg. Here'
I look at the Ten Tec way a little differently. If I wanted an Icom I would buy one, and the same goes for the other rice-rigs. If I wanted a home-stereo styled rig I would buy rice. If I wanted a ra
I just went back to the beginning of my watching this reflector--I was and am still considering the purchase of an O-VII to replace the venerable Omni VI+ . I started watching this to learn about the
Also, remember to turn the notch filter VERY slowly when trying to notch out a signal, as the notch is quite narrow. A quick twist will seem like nothing is happening. I mean, go SLOW. Once you get a
did you twist the split switch back? I have a Corsair II that works fine with my remote 263 VFO in line. When I remove the vfo and jumper the VFO IN and OUT jacks together on the rig, it fails to wor
I will take the filter if still available. K1SRRatARRL.net Hello Dale, I have a 250hz cw filter that I removed from a TT Corsair II # 282 . I am asking $60 for the filter plus $5.00 shipping. I sold
Drilling through a window--wow, you are a pretty confident person! I took a different approach, where I drilled two 5/8 holes through the side of the house at the same approximate spacing being caref
THE G5RV , SO IT SEEMS , 'LEAST TO ME IS SHAT ON, SPOKE DOWN ON, AND RIPPED ALL BY THEE BUT I KNOW HIS CALL SIGN, AND FAMOUS HE BE AND YOU, MYSTERY GRIPER, ARE UNKNOWN TO WE HE SHOULD HAVE DONE THIS,
this is incredible. Ten-Tec says they are done and will release "soon". Someone makes the observation that "well ,last time they released on a Friday". Now everyone is freaked out because the new toy
Too Funny :) Stand by for critiques :) Well here I go again, replying to a message and as I know soon to receive the ire of all for being such and IDIOT , but idiots forge ahead , so here we go .....
I have a speaker that I made up from a cheap computer subwoofer/satellite computer system that is wonderful for CW and Phone use. It is an Altec-Lansing system where the sub box is all that I use, af
I had this exact problem , called Paul at TT and got a fix. There are two pots that need to be tweaked VERY carefully. One nulls the carrier (only on LSB), the other is the freq. adjustment. (mine wa
I just opened my as new Millen 90651 G-D meter, and lo and behold, I have a manual for it. 10 pages including schematics. I can scan and email if it is of help. Please send an addy to me direct. Bob,
Omni-V is Very Clean, Non-Smoking environment. Has two optional filters: 1.8 SSB, and 500CW, no options in IF slots. PS is clean, recently refurbished by TenTec. Both look like new and work perfectly
I have one, in like-new condition, with a couple of spare tubes. Have not used it in a while, so , got something to trade? Folks: This is off topic but I am trying to locate a copy of a Millen Model
Stick a key into the RCA "KeY" input and go. Works great! Hello, I would like to hook up a straight key to my OMNI V however a friend told me that he thought there was an issue with the 'key' in jack