Windows; been running Windows XP Pro for over two years. Hasn't crashed yet..... Ron ..... NU1U _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.
Wonder were this 'good' software is; I've only had a few cases of using programs that set the ports. Personally, I do not want the software 'automatically' setting the parameters. Most 'ham' programs
Have an Orion here, and have been listening to 20 meter CW for the past 30 minutes or so. I am using an Heil ProSet; don't hear the clicks that many are discussing....... The only mods made to the Or
Just what is the best way of getting WHITE paint (what kind) on the Orion's MIC, PH, and CW jacks on the lower left side of the front panel without getting it every other place. I've already stuck my
Goodness, what a messy scenario.............. User Interfaces; the Orion is one of the best for such a complex rig that I have come across. I quickly learned the Orion's interface and do not forget w
Software updates are available for Dxbase 2004 to control the Orion. Ron ....... NU1U Me thinks Jack may want to reconsider that. There are going to be alot of Orions out there in the hands of top dx
Split Works on my Orion Ron ..... NU1U No split yet. Software updates are available for Dxbase 2004 to control the Orion. Ron ....... NU1U --Original Message-- From: tentec-bounces@contesting.com [ma
Don, I am running an Heil HC-5 element in a Radio Shack Cardioid metal microphone body. The Orion's settings used with this mic combination are: Processing at 3, Mic at 71, TX EQ at 0. I generally wo
Nothing is 100% complete upon delivery............ I had a Kenwood 930 ......it was definitely not complete even after a few production runs. You had the privilage of paying to have them fixed for co
My Verify function has never completed its task..... I've learned to disregard it (don't run it anymore) without any problems with the past updates. Ron ......... NU1U Bill Tippett writes: Kip wrote:
Rick, After you installed the update program and then opened 'Update', did you click on 'Settings' and enter the comm. port that you are using with the Orion? Ron ....... NU1U When I try to run the d
But does the manual tell one how to update the software? Ron, NU1U yes you can update the software, look on the back there is a rj45; and in the operator's manual, which is on the web, they talk abou
Well Said......... Ron........NU1U nk you. Unfortunately a great deal of what I have read is to me childish and a complete waste of the time it takes me to delete these messages. I am interested in c
Yeh, I had those problems with my Kenwood TS930 and Icom 775DSP..........Guess what? No software updates to fix those problems. Ron ....NU1U And, above all, enables manufacturers to release unfinishe
In a nutshell, I solved my RFI induced audio problem with the Orion and my Heil microphones by tying the Heil's Mic shield to both the Orion's audio ground and to the Orion's chassis connector in the
See my previous post on this subject. I solved my RFI induced audio problems with my Heil mics by tying the Heil's shield ground to both the audio ground and to the Chassis grouns Yep, the schematic
Jim, Thanks for the information. I believe that I will rewire the Heil (and the one I built) transition cable to do what you suggest. I do have some 'old time' balance mikes that I would like to try
Got my Orion in September of last year and have been updating it with the software changes. I would say that the Orion is one of the most 'reliable' rigs that I have owned so far (Especially when com
Still, I don't have those problems............. Ron.....NU1U Billy Cox writes: I can understand Tom's concerns. At the same time it is my belief that something that is deemed "unreliable" is somethin