Thanks Marcus I should have mentioned that I have duplicated the results using a brand new Siglent 1032x Sig Gen...it duplicates the results shown with the smaller Gen set. It seems that to me, the i
Thanks Ron, et al I have been around the horn a few times again this AM in the hopes I missed something... At wwv 25mhz band, best tones I can dial are at 510hz LCW and 891hz UCW...trying to lower th
I meant to add, the 6hz diff between ucw and lcw is valid, but only when I have compensated on the dial...ie, tuned 100hz high on my radio freq display to compensate for the amount the radio is out.
Thanks Paul...read my mind...everything I have done points to that. That's why early on I asked if there was some sort of read out adjustment...you know, as you would calibrate a freq counter? I have
Well, I think I have taken more than my share of bandwidth on the TCXO issue. For whats it worth, I thought I would share what I have learned despite not actually having cured the problem. The rig wa
Folks Some of you may have read about some of my issues with the freq alignment of my Orion. Turns out the tcxo is hooped...given the tcxo is now inobtanium, I found a manufacturer of such devices an
I recently purchased a TT Orion II and am anxiously awaiting its arrival. Obviously, I am reading all I can on it in advance. I was curious, however, if anything ever came of the external display for
Hello everyone, and happy holidays. I have a new to me Orion 2 that runs very well, albeit 100 off Freq. I have read the information on the tcxo, but it seems there is no adjustment left in it.. that
Thanks Marcus I think for certain it's associated to what you are suggesting...I had earlier dropped a note to the radiosmith, steve, who kindly replied he had seen that issue in an Orion, but not ye
Thanks very much for your response Marcus. That took some time and analysis on your part...I am awaiting the new caps for the A9 board so I may do that first and see what happens from there. I am sus
I truly appreciate all the assistance offered to date--on or off list. The situation is as follows with respect to the tcxo on the Orion 2: A station transmitting on upper sideband--say 14 140.00 wil
Have been trying to bring back an old omni c ...it has fallen victim to the golden screwdriver among other things.. Latest obstacle is a destroyed 10 m transformer T1 on the osc mixer board...I tried
Hi folks I seen yo recall this issue having been discussed some time ago but cant recall. In the omni I am presently playing with from last season, is working well except for low power out in general
Hello everyone I have been going thru the omni c over the past several days getting it back in shape. Its running well and my last remaining challenge was the power output. On most bands I was gettin
Carl, We seem to be be two countries separated by a common language...I have measured it...right up to where the red wire enters the P A...as in, inside the radio, red wire from fuse holder to the te
Thanks Bob Yes, all very true ....and 70watts to 90 watts no one would notice....just seems odd for 40m...either way, happy to have it working for the most part. Sent from my iPad
I am curious to know if anyone has ever played around with the band pass settings...set on most older TT rigs at 2.4kc. I am not suggesting it would be a good idea or not, simply inquiring if others