Once you get this figured out it would be a huge help to the TenTec community if you would write up your findings. I'm sure it would help others. I've dealt with a few PLL problems and information is
Maybe you could contact this seller and see if he's any help. http://www.ebay.com/itm/Ten-Tec-Model-240-KW-160-10-Meter-1500-W-Dry-Dummy-Load-for-Ham-Radio-Clean-/172447004562?hash=item2826a47792:g:B
Barry I fiddled with this on a Corsair II. The offset for it was 750 Hz for cw but on the O6 it would depend on your sidetone frequency setting. I would guess 1500 Hz for SSB +/-. I lost interest bec
I'm using an IC-7300 as the main rig. After getting it, my K3S was gathering dust so I sold it. I also had the Flex 6500, FTDX-3000, IC-7800, TS-590s, Omni 7, TS-950sdx, TS-2000, FT-2000, Omni VI+, F
Er....Neither can the Orion without external help from another SDR, computer and software. Blocky and lousy looking? Well it looks like a mini Flex to me. It can be difficult to photograph. I finally
Perhaps this video would help. The default is a "filled spectrum" which makes signals appear as colored blobs. You can change this to produce a nice trace of the color of your choice. https://www.you
Here ya go: https://www.youtube.com/watch?v=wa2GJ5Aq6io&feature=youtu.be The camera doesn't capture the sharpness of the display but believe me, it's totally in focus and very crisp. N4LQ
Gerd: I found this in the archives. It may or may not help. 73 *2/14/99* Several weeks ago, someone on the list indicated that they could not rid their Omni Six of audible "clicks" while listening wi
I just worked over an Omni VI ver 1 and fast QSK was very smooth. I hate clicks too! There's lots of little transients floating around the chassis when you key the rig. I've used the scope to help tr
It would indeed be unique and fill a niche in the market. No DSP. The PTO could become DDS with a serial port. No PLL. My Corsair II's are quieter than anything made today. Steve N4LQ
I had a loaded K3s then bought an IC-7300 and the noise level was slightly lower to the point that the K3s started gathering dust. Recently I picked up a couple of Corsair II's having forgotten what
I wish I had not said that about the NR. It just caused confusion. The Corsair II has no noise to reduce :*) The RFG and ATTN are actually the same thing on the 7300 and of course you can decrease th
Hi Barry. I used to think the Corsair II was noisier but I have a nice Omni C and the Corsair 2 is much quieter. Maybe I had a dud? I have 3 of these C2's now! TenTec finally fixed the popping AGC in
The "noise" situation is largely how it is perceived. S meters read the same on both the Corsair II and the IC-7300 but the "color" of the noise is vastly different. The 7300's noise is harsher and a
The camera/microphone was in front of my face. My ears are attached to the side of my head. As my head turns, my ears follow. Same for the camera/mic. What you hear in that video is exactly what I he
Barry. I just had a bout with one of my Corsair II's ALC LEDs. On the top of the rig you'll find the Low Level Driver board toward the left rear. There's a thumbwheel pot R15 that adjust the LED's fi
Barry You can erase my comment about the Corsair 2's noise. The Corsair 1 was the noisy one. As for the AGC. This was not a mod. TenTec totally redesigned the AGC between the Corsair I and II. The 1'