- 1. [TenTec] Omni C + SB200 (score: 1)
- Author: "Jeff Stewart" <stewgoat@indy.net>
- Date: Sun, 18 May 2003 13:31:08 -0500
- I picked up a Heathkit SB-200 at Dayton and if I read my manual right I need to build an external relay to handle the ALC voltage and handle the antenna relay line on my Omni C. Is this correct and a
- /archives//html/TenTec/2003-05/msg00596.html (7,566 bytes)
- 2. [TenTec] Omni C (score: 1)
- Author: "Jeff Stewart" <stewgoat@indy.net>
- Date: Mon, 7 Apr 2003 00:13:07 -0500
- I just bought my first Ten-Tec, an Omni C, and need to replace the main DC power connector on the rig and the power supply (280 supply). Is the Ten-Tec company the best or only source for the four pi
- /archives//html/TenTec/2003-04/msg00205.html (7,034 bytes)
- 3. [TenTec] Omni C - No TX (score: 1)
- Author: "Jeff Stewart" <stewgoat@indy.net>
- Date: Mon, 21 Apr 2003 00:36:22 -0500
- While adjusting my MFJ antenna tuner, my Omni C kicked out of transmit (too high an SWR I assume). In the past, just shutting the rig down then powering up would reset it. Now every time I key the mi
- /archives//html/TenTec/2003-04/msg00563.html (8,241 bytes)
- 4. Re: [TenTec] Omni C - No TX (score: 1)
- Author: "Jeff Stewart" <stewgoat@indy.net>
- Date: Tue, 22 Apr 2003 01:00:35 -0500
- Thanks to Jerry I found the 20 amp fuse in the supply blown but the replacement fuse blew also. Unhooked the supply from the rig and jumpered the switch lead that goes from the supply normally to the
- /archives//html/TenTec/2003-04/msg00588.html (10,309 bytes)
- 5. Re: [TenTec] Omni C - No TX (score: 1)
- Author: "Jeff Stewart" <stewgoat@indy.net>
- Date: Sat, 26 Apr 2003 03:25:07 -0500
- Thanks to Mike, Jerry and of course Garland Jenkins at Ten Tec I fixed my Model 280 supply with 2 used J802 pass transistors I had on hand. Everyone's contribution is much appreciated. The J802 is a
- /archives//html/TenTec/2003-04/msg00712.html (11,983 bytes)
This search system is powered by
Namazu