Hi All, This is the reply I got from Ten Tec service regarding switch cleaning. 73 Tim Dear Tim: Yes, I would agree that the band switch needs cleaning. We recommend using the Caig Deoxit to clean th
Hi, Have you tried replacing the fan mounting isolators they have probably gone hard by now.. My Titan was noisy from day one, and to reduce the noise transfer to the chassis I loosened the mounting
Hi All, Have you noticed the helical slats on the top of tall steel smoke stacks. These are to reduce the wind load by distributing the vortices around the stack. I assume that similar things are hap
Away from the mic input socket side, I think if the psu is too close to that side it induces hum. The aluminium case does not screen the fields from the transformer at all. I always put my psu on the
Hi All, I have an original Titan that has not been used for about10 years. I am now very concerned that the PSU might have problems if I was to power it up. I do remember that my fan was rather noisy
Hi All, I have been using XMlog for many years. I looked at the web page yesterday, and it is now capable of interface with transceivers. The home page is http://www.xmlog.com/. 73 Tim
Hi all, There is a full review of the Orion in the RSGB mag Radcom for June 04. Main conclusion is that "it is a truly excellent radio" Regards Tim g4lmh
Hi all, I remember the recent discussion regarding balanced tuners. I have just got my new Radcom and there is an ad you might be interested in. The site is www.linamp.co.uk Cost is said to be £345 w