I would like to hear what folks are using to set up one speaker that can be used by multiple rigs. One good idea I've heard is the Behringer MX-602a (a sound mixer). As I operate 99% cw the sound mix
Hi folks - Sunday morning coffee time and I thought I would chime in on this topic. I agree with some of John's thoughts. Many of us are new to the hobby - 2 and 1/2 years for myself. I do not have t
This is interesting. The above mixer seems to be used by a lot of people who like it. Got many comments about it on and off the reflector. It was first mentioned to me by John / N0KHQ / St. Louis and
Thanks to Bob and many others who gave some great responses to this question. Multiple rigs coming simultaneously thru one speaker is an intriguing thought - keeps the shack clean but still allows fo
Doug - Don't know if this email was meant for just Carl, but I wanted to sau that the V.9 upgrade is the single BEST DEAL in ham radio today IMHO. I did Carl's mod, which is very easy, and it was fan
Hi folks - When I kick in the 1.8 filter (from the 6.3 board - not the 9MHz board) on my recently acquired Omni VI+, it doesn't seems as though it's having any effect. Yes, the filter is there and th
Hi folks - Regarding my 1.8 filter that does not work, I tried Ron's test, below, with the PBT at 4 o'clock and found no difference. Then I opened the rig and pulled the filter out of the slot while
Chester, Anthony and all - Thanks for more advice. I did some filter swapping and have discovered that putting the 500Hz filter in the 1.8 slot has no impact on the rig....so I must conclude that the
Thanks everyone for continued good suggestions. I called TT from work today. Paul said to check to make sure diodes D9 and D10 are not shorted and then check voltage on the connectors in the upper le
Hi Anthony - (Caveat - I'm a CPA and NOT an electronics guy by ANY stretch of the imagination!) So far I've been able to determine that when each of the three PBT filters is selected you should be ab
Hi folks - I have noticed two Century 22's for sale recently. They fascinate me a bit. Does anyone know if the PTO can be easily rebuilt on these if needed - or the situation with spare parts? Or any
Hi folks - I've noticed on the TT website that Orions will be available in April for those who order now. The first run seems to be sold out already. Other than TT's rep and a vague feeling that the