*Douglas,* * My Paragon PA is very close to being the same. Several Months back, we had an issue where the Logic Circuits would just lock up at anything over 50 Watts. We changed the Three or Four El
*My last post was in addition to what Bob/K4TAX advised about the Bypass Capacitors. Sorry, should have made that clear in my original post......* * Wade/KJ4WS* ______________________________________
*Having recently done an alignment on one of these rigs, that is my question also. Which is.... Is it off frequency on USB and LSB or just one mode. If just off in LSB and USB is correct or is it off
*Amen and 100% agreement on your statement Bob. A workman is only as good as his tools. Although when I was younger, about anything on my 1957 Chevy could be fixed with Vise grips and a Clothes Hange
*You can also place the rig under test on a dummy load and tune a known good rig and your victim to the same frequency and mode. Then adjust the Band Pass so that your voice sounds correct and natura
*Even my 50 year old Heathkit HW-12 Single Bander has a Digital Display.* *Check it out below......* *http://www.ebay.com/itm/121374336695?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT <
*I like my Tuner in the Shack and also with Big Knobs on it. The rule for me is KISS (( Keep it Simple Stupid )) And I am that a lot of times! But, then again we really like our 450 Ohm Window Line a
*Clean and working correctly..... 250 - 300 dollars. In 10 out of 10 condition... 325- 375 dollars Max... * * Wade/KJ4WS* _______________________________________________ TenTec mailing list TenTec@co
*Barry,* * Thanks to Ebay, those Filters that you valued at $50.00 each, can't be found for less than about $75.00 each..... Just so you will know.* * 73 from Wade/KJ4WS* ____________________________
*The 585 Paragon is New enough to be Dead Bang on Frequency and is very easy to repair. Same thing with the Omni 6 Rigs. Although the Older production runs are best, where surface mount components ar
*Barry,* * I do understand your point about wanting to test the filter and confirm the gain and specs. But, what you would or would not pay or do, doesn't affect the price of these filters on Ebay or
*I thought I said that. * "Although the Older for the more detailed info. All truth be told, they are still Rock Solid and Dependable Rigs. Surface Mounted parts are Not some kind of Gremlin or Demon
*A very good Friend of mine has a Flex Radio. He Brags about it Constantly. So why is it that every time we hear him On the Air, He is talking on an Omni D which he has had on loan from me for a bit
*His is the Flex 1500 .... Maybe they have gotten better. The Flex-6500 is quite expensive, next to his Flex-1500 ...... Nothing we have found in the Flex Forums so far has helped. Other reasons, may
*O.K. at age 60, call me an old fuddy duddy! I can see no reason to ever bring a Computer or DX Cluster into use in my Shack. We get all of the Contesting needed out of our system during Field Day Op
*Rick,* * Unfortunately, your comments are most probably true. And this makes me even more happy, to have several Back Up Rigs to fall back on. However, having only seen the Flex-1500. My attitude ma
*1. Don't be an Over the Shoulder Adviser.* *2. Stay very Calm and Be Nice to Her.* *3. Go visit a Fellow Ham while she does this job for you.* *4. Praise Her Bunches, no matter how it turns out.* *5
*Hello All,* * With way too much time on my hands. We decided to take a look for the Mixer Board Parts. Below is what I found. Could someone please check my work, that we are referencing the correct
*I purchase from alltransistors.com <http://alltransistors.com> sometimes. And as for Ebay, those sellers have a feedback rating to worry about. I just purchased 5 adjustable 3.3 volt regulators SMT
*Hello Ralph,* * You couldn't have said that any better as far as I am concerned. I love my Ten Tec Radios and really enjoy operating them. Today I replaced two Relays in the Low Pass Filter Board of