*From what I hear, they are still unpacking boxes and getting organized. Other than that it's Business as Usual. At the Tec Tec website, there are pictures of the workbenches fully set up with test e
*I highly doubt that my little 450 Ohm Windowed Line, will ever be used at 12.5Kw. For an ERP of 20.5Kw like KFBK. My 80 Meter Dipole however works just great with the 450 ohm line and a good Tuner.
*Thank You Bob,* * An Antenna is a System. My Antenna System is 126 feet of #12 wire at 36 feet high. ( flat top ) With Window Line ( 450 ohm ) running down to the eve of the house. We bring the feed
*Sorry about calling you Bob .... Rob, my eyes are getting old.....* -- *Living one day at a time with Jesus as my Savior. But, still having Fun.* _______________________________________________ TenT
*It's just a plain old Center Fed Dipole. If I will need a Tuner anyway to cover the Whole Band with an OCFD, we would rather just use the Window Line (450 ohm)... And get rid of all the Coax Losses
*Check your inbox. We sent the Omni VI Manual in .pdf format. We didn't get a message that it has been bounced by being too large. Also, please advise if you need any others. Omni VI Plus etc.???* *
*Congrats Jon,* * Sure am glad that you toughed it out. And also, thank you so much for keeping us in the loop when you cured the problem. I really miss my Corsair. We could run the RF Gain back a bi
*Sony, was the start of the VLSI movement with SMD, Video and Audio Processors. I had the privilege of working on top of the line Sony Camcorders at a Sony Premier Dealership. ( before the Cheap VHS
*Hello Al,* * We had that exact same issue with a Corsair for my Friend Cary/W5SRR. * * Wade/KJ4WS* -- *Living one day at a time with Jesus as my Savior. But, still having Fun.* _____________________
*Paul, at Ten Tec says that the Relays for the Low Pass Filter Board for the Paragon, are no longer available. Written on the white body of the relay is Wabash and the part # on the relay is 1925-3-2
*Thanks Peter,* * If we can't get OEM? My plan will now be to replace them all. And thanks again for the advise.* * 73 from Wade/KJ4WS* -- *Living one day at a time with Jesus as my Savior. But, stil
*Below is what we found. I have 2 on the way to try out before purchasing about 25 of them. * * 73 from Wade/KJ4WS* (KO) 1017-18-1 *Wabash* RF reed relay used throughout the KWM-380. High quality. Ea
*Is there no salvaging the original switch? Just curious here, how did it fail?* * 73 from Wade/KJ4WS* -- *Living one day at a time with Jesus as my Savior. But, still having Fun.* __________________
*You know your getting old, when you can remember the pin out on a 6GH8 or 12BY7 tube but, not why you came into the Shack just now. And you're really getting old when. Your best Friend asks " Are yo
*I will stick my opinion in and say that it is an Award.* * 73 Wade* -- *Living one day at a time with Jesus as my Savior. But, still having Fun.* _______________________________________________ TenT
*Where I come from, the phrase " present this Award " gets used a lot. A Diploma should be something you have studied for. And a Certificate would notate that something has been Certified. I believe
*OK. I am done studying. The ARRL in the link below calls them Awards, which are given out by the Awards Committee ...... I will now turn my feeble mind back to Idle and try to save the last few hair
*I also need Ten Tec Parts. We need an end cap that slides into the side of the case, between the front panel and the radio. One from a Paragon, Omni 5 or 6 should fit. Also, I maintain the BBC Club
*Two quick updates. First, we won't be selling parts from this Paragon. The parts for the Low Pass Filter Board, are all that is needed to have a great rig again. Second, Parts from an Eagle, have a
*Hello Guys,* * We have had one thing after other going on for weeks now. First it was Pneumonia and then my Miss Brenda, had troubles. Just before Thanksgiving was the Auto Accident. Then the trip t