I hope you are joking about that!! 73, Tony VE3DWI. Sent from my BlackBerry 10 smartphone on the Bell network. Original Message From: denton sprague Sent: Thursday, January 7, 2016 12:13 To: Di
It would probably more economical to obtain a stand alone analyzer that can be used for all antennas. Just my opinion. 73, Tony VE3DWI. Sent from my BlackBerry 10 smartphone on the Bell network. O
I would use the 14.8V pack. Depending on the TX power you are going to run, get one (or two) diodes capable of carrying the current you need, and put it (them) in series with the supply line to drop
Hi Andy, Are you saying that there are two (2) batteries in the Orion-II? I was not aware of this. Please enlighten me. I only know of the Memory battery module, the square Yellow one. 73, Tony VE3DW
Thanks Barrie and Andy. I have the LDG auto tuner for the Orion-II which I got before they stopped making them. I don't know if it has a battery too but I'll find out. 73, Tony VE3DWI. In other words
I bought my Orion-II on May 05, 2006. I did not buy the ATU as I had seen and advertisement from LDG who produced and sold an ATU for the O-II as an exact drop-in module. It had many memories and oth
Thanks Allen. Tony VE3DWI. Tony, Before you remove all those torx-head screws...my 565 has the LDG RG-11 autotuner which has no battery. Allen--W7GIF -- Original Message -- From: Tony Lelieveld<mailt
Kris, When you said "Test one fuse at a time", I presume you meant Tube? 73, VE3DWI. I'm late chiming in. My problem with the fuses has always been a shorted tube. You are on the right track. Test on
Barry I just obtained a KR50 without manual. If you have it in PDF. I would appreciate a copy please. Thanks. 73, Tony VE3DWI. Sent from my BlackBerry 10 smartphone on the Bell network. Original
Gary, Why would Ten-Tec have to "come clean" about these capacitors. They got shafted as did many other manufacturers. You make "using the lowest bidder" sound like it is a crime. BTW, in case we w
Hi all, I am looking for a schematic for this power supply. A friend got one without a radio. It has the knobs on the front for a VOX system too but that is not important. We need to know which 2 pin
Hi Rick, Yes I am planning to do that but I don't have the PS here. I'd still like to find a schematic for it. Thanks anyway. 73, Tony VE3DWI. Sent from my BlackBerry 10 smartphone on the Bell networ
I have a double extended Zepp fed with ladder line and a Ten-Tec 238-B tuner and it works GREAT. I can use it on all HF bands. 73, Tony VE3DWI. Sent from my BlackBerry 10 smartphone on the Bell netwo
Wade, Is your "antenna system" center or end fed. Just curious. 73, Tony VE3DWI. Sent from my BlackBerry 10 smartphone on the Bell network. Original Message From: Wade Staggs Sent: Tuesday, Oct
Rick, IMHO, a Diploma is confirmation of the successful completion of an academic pursuit. I think that either Award or Certificate is more appropriate. 73, Tony VE3DWI. Sent from my BlackBerry 10
Hi Joe, In 1989 I used that kind of antenna for about a year (before I put up a tower with a tribander) and it was quite useful on 20 mtr. I had a regular schedule with my brother in New Zealand, ZL1
My Orion-II is now 8 years old and has not given me any problems but you never know when it does. I also have an IC-746-Pro, willed to me by a dear friend who is now a "SK". That's the very reason I
Rick, You are mirroring my thoughts exactly. That's the way I would want my VOX to operate. 73, Tony VE3DWI. Sent from my BlackBerry 10 smartphone on the Bell network. Original Message From: Rick
I bought one for my Orion-II in 2007. Shortly thereafter LDG stopped selling them. I can only guess as to why!!! It is a better unit, than the Ten-Tec one, as it has memories to retain multiple band
Take a PL-259, solder a 50 Ohm resistor in it and connect it to the antenna port. If it is gone, it must come in externally. This small termination you just made will come in handy in the future. Go