Spring cleaning coming a little early here in the high desert this year. Would like to sell my Omni 6+. This is a model 563 with option 3 (factory installed), which according to the QST review of Nov
Folks, I have a bunch of NOS Mate-n-Lok connector shells gathering dust. Total of 8 (eight) 2-pin as used on Orion etc. and 4 (four) 4-pin as used on older TenTec rigs. $10 brings them to your US doo
18" long with Hercules II 15-pin Molex connector on one end and large Anderson Powerpole connector on other end. I have a photo, please ask, message was too big with it. $22 brings it to your lower-4
I wish I had more of these. Thanks to everyone who replied. The power cord is sold. 73, Mike W2IY --Original Message-- From: TenTec [mailto:tentec-bounces+w2iy=verizon.net@contesting.com] On Behalf O
Hi Gary, Do you know where I can get some of the TaikoDenki TMP-K01X-A1 plugs that mate with the on-board connectors in the Orion? Thanks and 73, Mike W2IY --Original Message-- From: TenTec [mailto:t
Is there an Orion I service manual anywhere out there? I have just changed the power connector to a 2-pin mil-spec circular connector and in the process mixed up a few of the internal coax connector
My Hercules II has been acting up and I am asking the list if anyone can recommend a good repair facility/service for this. Thanks in advance, 73, Mike W2IY
Thank you to everyone for the thoughtful replies. Mainly the amp is not switching properly. When I got it, it did not pass through properly when the power was off, so I dug into the vacuum relay boar
Hi Ken, I am driving it with a TT Orion with the keying connected as in the TT manual. No, it does not key at all yet. Have not tried the replaced control board yet, I have been out all afternoon put
What a headache. So much current flows that the Molex connector melts (yes, probably because the pins are loose and not making good connection). Does anyone have a suggestion for a better connector?
Mike, thanks for the pointer to the power pole solution. As you could tell from my note, I am pretty frustrated with the Molex. 73, Mike W2IY Hi Michael, Here's the link to step-by-step instructions
Folks, I have a QSK-1500 for sale, $175 includes USA shipping. Same functionality as the QSK2500 but a different manufacturer. A pdf of the manual is included. Used but in perfect operating condition
Good one, Rick! And a happy 4/1 to all :) 73, Mike W2IY Hey guys, on this great 1st Day of April, 2022, I am proud to announce: That I have developed a new line of 'Cutting Edge' antennas that well i
I am asking for the list wisdom about these 2 rigs. I have one of each but can't keep both. I'd be interested in hearing what people think are the advantages and disadvantages of each. Thanks in adva
Hi Bill, do you still have the Icom 2700 and/or 2710? All working? What are you asking for these? Cn you send anyh pictures? Thanks and 73, Mike W2IY --Original Message-- From: TenTec [mailto:tentec-
Hi everyone, does anyone have a copy of instructions for the 311 band data converter they can share? Usual sources come up empty. TIA for any help, 73, Mike W2IY
Folks, I am trying to follow the instructions in the manual for adjusting the tuning dial drag. It says to grip the silver ring and hold it still while turning the inner dial. But the inner dial seem
Model 234 in excellent condition with original manual, $100 includes USA shipping. Also another original 234 manual, excellent condition, $12 includes USA shipping. Thanks for reading, 73, Mike W2IY