Hi All, I must assume that Ten Tec CHANGED the flash update software since 06/25/2003. I followed the instructions that date included uninstalling my old version of the flash update software, downloa
The FCC is requiring us to include in our log, if we are not using a simple dipole, either the calculation or the manufacturer's published gain on the antenna we use on 60 meters and adjust our outpu
Help, I just updated the flash in my Pegasus and the only way I could get it to work was to turn off the 'stop on error' . If I didn't, the update would stop and the radio was unusable. I do have the
Hi, This could be pilot error because I never use the radio for ssb. But I tried today and got no output. CW output is fine. I tried 2 Heil Headset mics and 2 Heil pigtails. Before I open up the radi
Thank you all for your suggestions. They confirm that my problem is not pilot error by me. I've checked everything I could think of to no avail. Next I checked the accessory input to see if I could g
And many offered help and suggestions. I thought I'd let you know what the problem was. I finally got around to opening up the Pegasus and figured I start with adjusting the mic gain. I put a screwdr
And many offered help and suggestions. I thought I'd let you know what the problem was. I finally got around to opening up the Pegasus and figured I start with adjusting the mic gain. I put a screwdr
For Sale: Argonaut V 516TCXO in excellent condition. I received this radio in mid-January. It is loaded with V1.04 firmware. I've compared it with my Pegasus and it has a better receiver than the Peg
Hi Tim, I've been following this thread but I just haven't had time to respond and I am chomping at the bit. I do agree with you. Quality at Vibroplex has slipped! No doubt about it. I recently bough
goes Especially if you use your software, Carl. I just did a test the N4PY software and I can set the tuning rate to any rate I want, for example: 1, 2, 3, 4, 5 or even 77 Htz if you want and anywher
I just got and installed the new LDG PT-11 Plus tuner. All went well with the installation into my new Pegasus. If memory serves and it usually doesn't, it involved removing 2 boards, 4 wire solder c
Hi All, If you want to see what a screen capture of N4PY's software looks like, here is a link: www.w2nra.com/qrp I've have a ball with this package. This screen capture also includes DXBase logging
Hi Floyd, You are right, the Argonaut V works like a Pegasus. So you are just swapping file info for rig control . As long as you point to the directory where the Pegasus files go it should work fine
I've seen Ten Tec equipment listed for sale here. I want to sell a non-Ten-Tec low power HF transceiver. For that reason I won't list it here. Anyone know where can I post it? I am anti-ebay. BTW I s
Thank you all, Here is a list of the suggestions I received to sell non-TT ham gear so far. ARRL classified - free to members: www.arrl.org/RadiosOnline Colorado QRP Club: groups.yahoo.com/group/CQCS
It's an SGC SG-2020. I thought about keeping it as a backup but I think I'll either get a second TT516 or many a Pegasus. I'm just hoping the DX bug doesn't bite harder if I get the 100 watt rig. I u
Please don't type links, cut and paste them (just one of my many pet peeves). The above link doesn't work unless the "tt" is "TT" http://www.tentec.com/TT565.htm 73, Art W2NRA