It comes from my best friends estate. His call was AF4XC and we are or were longtime Ten Tec devotees along with my Dad SK K8MC/6 and Mac SK K8MG/4. The rig is just back from Radiosmith for a full r
Does it include the power supply? Fully functional? Thanks / 73 Charles W3KC On Monday, March 6, 2023 at 02:43:19 PM EST, Rick Cochran via TenTec <tentec@contesting.com> wrote: I have a Hercules II a
Is it still available ? Thanks 73 Chas W3KC I have an unused noise blanket board for the Scout - this is surplus from the move TenTec did a while back. It is not adjusted but is working. 25 bux plus
Is the Omni-VI still available? Chas w3kc@verizon.net FS: TenTec OMNI-VI OPT-3 SN #02A10486 - In excellent electrical and cosmetic condition. TCXO installed. INRAD 600Hz roofing filter with PROC swi
GaryHow of the Omni VI tuning knobs (with tires) do you have available?Are they usable on the OMNI v? TNX Chas w3kc@verizon.net I have accumulated about half a dozen really nice main tuning knobs for
Jim- I have a 208 filter if that would be of interest. I used it with my Argonaut 509. Chas w3kc@verizon.net Looking for a 208A for my Argo 515. 73, Jim Crites W6JIM ________________________________
Lots of great ideas being put forth here. A couple of additional things I would suggest : - Provide an easier way of getting into the SPLIT mode. - Provide the capability to easily attach a remote tu
Regarding a good, versatile antenna tuner - I have for many years used and recommend the vintage Harvey Wells Z Match. http://www.swedeart.com/harvey/html/z-match.html 73 Chas W3KC
Hi John I use the vintage TT 405 amp often with my TT 539. It works great if you accept that the combo is not quite full QSK (the 405 T/R delay can be adjusted down to what I would call "semi break-i
So, from a practical view, I'm thinking that our Omni V memory life is more a matter of usage (memory in/out cycles) than time. The clock memory life seems to be a seperate issue (the replaceable lit
Carl N4PY posted: .... Noise Reduction (NR) is a completely different function. It has only been around since DSP starting becoming used in radios. It works by attempting to find an algorithm that ca
Agreed. I really enjoy using the 301 pod with my old Omni V/VI rigs. So much, in fact, I bought a PigKnob for my K2 to give me the same convenience. 73 Chas W3KC Art N4UC posted Whatever you guys dec
Barry I have two nice Omni V's - one on my operating table that I use daily. The other one has been on the shelf as a spare for a couple of years. As it turns out, I have never needed a spare. Bottom
Gary AB9M posted: The CORSAIR-II, with its PTO and AZNAC type receiver design, may be one of the finest, quietest analog receivers ever built, at least by Ten-Tec... Did the original Corsair employ t
Has anyone noted Owners Manual (including schematic and parts lists) errata for the original model Corsair (the Corsair "I") ? Seems there are still plenty of those original models on the air that ma
Research indicates other historic ball coloring meanings: - The use of a red ball for flag signaling was used as early as the 1800s particularly by the Navy. - The term "Red Ball" was a railroad phra
The new amp seems to meet the same basic need as the neat old TenTec 405 amplifier that mates so well with the 509 and other QRP rigs as well. 72 de Chas W3KC Jim Miller K4SQR posted: I am certain th
Rockey W9SCH used open wire feedline on his "Upper Outer" antenna. He trimmed the horizontal wire to equalize current on each side of the feedline. 73 de Chas W3KC