hear my 707 on 1997 at 800 pm 708 has more lowin more bass I agree with Bob's remarks. The two microphones use the same element, but achieve different results. Doug WD4LNW The configuration and not t
Try a 709 I use the 707 with the Omni VII and always get "great audio" reports. Typical values: SSB TX BW 3000 TX Roll Off 250 TX EQ 0 dB Speech Processor 40% MIC GAIN 55% * *Value dependant on Hardw
get the 709a 69.00 I use one one my Jupiter and on the Orion Just bought a lightly used blue screen Jupiter. I operate with an indoor dipole at up to 40 watts. With my Kenwood, anything higher than 4
I have a 320ft dipole up 70ft feed with ladder line works great on 160 to 10 meters most of the time hams think I running a amp. The problem here is the ground is so rocky that radials are all but im
2 trees and a 70ft tower at the center. I bet! What do you use to 70' masts? Trees? 73 de W6OGC Jim Allen I have a 320ft dipole up 70ft feed with ladder line works great on 160 to 10 meters most of t
yes 81537 81537 you mean? I'm confused. Best regards - Bry Carling Check QI and D1 and Q2 on the filament AC Board no.81535 73 Rod _______________________________________________ TenTec mailing list
one of the tubes may be shorted take them out and check the pins for shorts 73 Rod I have a Tentec 422 Centurion that is blowing the main 20 Amp fuses... Looking for insights to this amp failure. It
A friend of mine has a Centurion he gave it to me for repairs and it would blow fuses, I took out the tubes and found one shorted.with the tubes out it did not blow fuses. Thanks Rod and PC. I alread
not interested if no mike The Argonaut VI manual does not list a mike included in the Accessory package. The Eagle does list a 702 hand mike listed in the Accessory package. I use the model 702 mike
I use a 80m double ext zip work 160 - 10m tune it with a Ten-Tec 238 tuner. 73 Rod the ant is up 70ft. Guys, Carl, Stuart, Bob, you are all correct, but not correct in every instance. Partially corre
yes, there will be a new one. I think Ted, W4NZ, hit the nail on the head. This certainly is not the scenario normally seen when a company is rolling out a new product and declaring an existing produ
Mabe not ATLANTA what about VA which was part ok the 3 call area at one time. --Original Message-- From: Jack Emerson Sent: Wednesday, May 15, 2013 10:09 PM To: Discussion of Ten-Tec Equipment Subjec