Gary......Wallymart....works like a champ....73 Ed W3NR _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
FSK requires only the TXD from a comport. In MTTY setup, under afc/atc/pll choose FSK, under the tx tab choose the comport used, and under the misc tab choose com-txd (fsk). A ptt connection is only
Marsh, since you originated this thread, I'll reply to you and the others that have contributed to this thread can follow along if they wish. I have been using FSK not only with the Omni VI, but also
John, acording to soucreforge the rig number is 1602. You might try either Xdx or Xlog to see how it goes. 73 Ed W3NR _______________________________________________ TenTec mailing list TenTec@contes
Toby, me thinks you are preaching to the choir...hi Ed W3NR _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tent
I would say a blown cap somewhere on the display and/or processer board. Ed W3NR _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/
Argonaut 509 w/CW filter and manual. In very good condition,works well.I converted 10 meters to 30 meters, easily reversed if so desired. Smoth PTO and no known problems. $250 OBO Ed W3NR ___________
I have the 525D and need to see if I can find the correct info on curing the AGC "pop". So far, the candidates are C28 C30 and C40. C28 seems more reasonable, but can anyone tell me for sure. I've al
Mike, thanks for the info. I had already checked the websites. I was looking for some user input. I need to knock down the 20 and 30 over signals on 40/80. And the AGC "pop" is murder on the ears. Ed
Argonaut 509 w/CW filter and manual. In very good condition,works well.I converted 10 meters to 30 meters, easily reversed if so desired. No other mods. Smooth PTO and no known problems. $250 OBO Ed
Argonaut 509 w/CW filter and manual. In very good condition,works well.I converted 10 meters to 30 meters, easily reversed if so desired. No other mods. Smooth PTO and no known problems. $250 OBO Ed
Argonaut 509 w/CW filter and manual. In very good condition,works well.I converted 10 meters to 30 meters, easily reversed if so desired. No other mods. Smooth PTO and no known problems. $250 OBO Ed
I find it hard to beleive there were no instructions, sounds like a "senior moment" to me. Call TT and ask them to send them along. They may send them via email as they are usually only a page long..
Argonaut 509 w/CW filter and manual. In very good condition,works well.I converted 10 meters to 30 meters, easily reversed if so desired. Smooth PTO and no known problems. $250 OBO Ed W3NR __________
I tried it on an Omni A, worked great. But on the Omni C I noticed some whine from the digital display. YMMV Ed W3NR _______________________________________________ TenTec mailing list TenTec@contest
Peter, I also suffer from the same type of hearing problem and can sympathize with you. At times CW just isn't fun anymore, the ear ringing is about the same pitch and tone as the CW. I selected the
Looking for one, if you have one that is excess, let me know price and shipping. Ed W3NR _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contest
I've been following this thread. The exact same IOgear cable is available from Walmart for $25, and their 4 port hub is under $10. Works perfectly under XP for rig control and digi modes, and AFSK RT
Hands down, without a second thought. Omni-A. I had one and without question was probably one of the best if not the best receiver TT made. I did the CW mod as suggested by Steve N4LQ and the improve
Ken, here is a reference Steve made on another subject but included this blurb also. This is from May,2000 so the original posting shouldn't be too hard to find. It truly picks up the audio response