Tried getting a PMO today. Went to the PO three times. Long lines. Decided to try Wal-Mart. In and out in 5 minutes. WMMO on it's way via snail mail. Decided to have the rig shipped to me here in Ari
Hello Howie: Until you locate a new fan, try this. Pick up a small can (2 or 4 oz.) of Dri-Slide. You can find it at Bike and Gun outlets or you can order it from Dri Slides web site. Apply a few dro
Many/some? out in radio land refer to the Argosy family as Argo. The 525; 525D along with the 556 (ARGO). The Argonaut family as Argon; The 505; 509; 515; 516 and 535 Easier for me if I just use the
Hello Jerald: Thanks for putting me onto N4JK's article on the modified D-104. ( http://members.cox.net/n4jk/d104.htm ) Are you using the Astatic cartridge on your 104? I have an old D-104 carcass so
Hello Jerald: Thanks for putting me onto N4JK's article on the modified D-104. http://members.cox.net/n4jk/d104.htm Are you using the Astatic cartridge on your 104? I have an old D-104 carcass somewh
Is there a problem with the S1 mic? The one I have is very thin on the highs and very thick on the lows. Same report using it on a Argonaut V and Jupiter. Sent it back to Heil and they advised that t
You might take a look at the ADSP2 DSP uynit from SGC. http://cls.audiogon.com/cgi-bin/cls.pl?ampstube&1104662465 I am using them on both my Argonaut V and Corsair II. Was so pleased with the first u
I would hang onto the Omni for a while and let the dust settle on the Orion issue. Better yet, try one for 30 day's along side the 564. For your type of operation you may find the Orion has a lot of