FS. Ten Ten Desk Top KW I have a desk top KW station made by Ten Tec that is in a 19 rack with Ten Tec markings. I am the second owner of the station. I have all sales info and manuals Has the follow
I have a Paragon and need to replace the display/meter lights. The ones in my radio do not have any markings on them. Anyone know what the bulb is? The manual/schematic do not show them!! I plan
Barry, If you have a drill press, I would use a reverse, left hand drill bit. To subscribe or unsubscribe via the World Wide Web, visit http://lists.contesting.com/mailman/listinfo/tentec or, via ema
I have a parts Argosy that the RX works and the power out is low. About 5 watts. I would like to offer it to some one that needs parts to rebuild their radio. This is the radio and power cord. The di
Thanks to all that have emailed and called me. N1MHC called about 10 min's after I posted it and he has a check in the mail to me. Paul, WG0G -- Paul Ramey WG0G 612-747-1244
I have a Orion 565 that is full of filters, 250, 500 and 1.8. It has a auto tuner and a 705 desk mic. It is loaded with the latest software and TT replaced the battery about 2 months ago. It has an i
Thanks to all that answered my posting. Resetting did not help, power cont was OK and making good contact. I called TT repair and after talking to them about the problem, looks like my CPU board coul
I need some help. I have an Orion, 565. Turned it on today and RX working FB. When I tried to transmit, no power out, ALC light or meter movement while transmitting. I can RX on any band, the voice r
I have a Hercules II that is currently wired for remote use with my Omni VI+. Can the Hercules be used in remote mode with a Orion by changing the plug to match the Orion's band data 15-pin plug or i
While using my radio today I lost all of the segments on the DSP1, right side digit. So now I get a read out that is 1 .225, 2 .225 instead of 14.225 and 21.225. My computer programs shows the correc
First Thank you all that answered me!!! I opened up the radio and tipped the front panel forward. Then cleaned connection 89 & 90 . I then cleaned the pins that hold the two display boards together.
Hello to all of you on the list. I picked up a Omni VI+ option #3 a few weeks ago. Radio works great and is loaded with filters for CW and SSB. I found that the radio is off freq by plus 0.07 in USB
I am looking for a schematic for the TT 962 power supply. Anyone have a copy in a PDF format? My filter cap's are failing and TT said that the stock cap's are not made anymore. Trying to see what my